Covering Ashton-in-Makerfield and nearby
From shops and surgeries to schools, care homes and private houses, any building in the WN4 postcode district can be covered for fire door hold-open devices. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Doors at quieter sites in Ashton-in-Makerfield and elsewhere in Greater Manchester can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Haydock (1.7 miles), Golborne (2.2 miles), Newton-le-Willows (3.1 miles), St Helens (4.1 miles), Wigan (4.2 miles), Hindley (4.4 miles).
What to think about for fire door hold-open devices in Ashton-in-Makerfield
- Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
- If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
- Schools and colleges in Ashton-in-Makerfield may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
- Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
- Care homes in Ashton-in-Makerfield usually want bedroom doors that residents can open easily. Free-swing closers suit this, provided the evacuation strategy for the home supports them.
Fire door hold-open devices in Ashton-in-Makerfield: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Ashton-in-Makerfield and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ready to stop wedging fire doors open in Ashton-in-Makerfield? Book a free survey and get a fixed, itemised quote for every door that needs a hold-open device.
Fire door hold-open devices in Ashton-in-Makerfield: questions
What will the survey in Ashton-in-Makerfield look at?
The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.
Is there a guide price for fire door hold-open devices in Ashton-in-Makerfield?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Ashton-in-Makerfield confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit fire door hold-open devices in Ashton-in-Makerfield?
Yes. We arrange surveys and installations in Ashton-in-Makerfield through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
Are battery hold-open units a good choice for older buildings in Ashton-in-Makerfield?
Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.
Is there a warranty on fire door hold-open devices?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Can automatic doors be fitted to a listed building in Ashton-in-Makerfield?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Ashton-in-Makerfield?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.