UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Greater London

Fire door hold-open devices in Kilburn

From a single lounge door to every corridor door in a block, we fit fire door hold-open devices in Kilburn and elsewhere in England. Each door is surveyed, priced on a fixed written quote and tested by releasing it from fully open before handover.

Town
Kilburn
Area
Greater London
Postcodes
NW6
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Kilburn and nearby

Our coverage of Kilburn takes in the NW6 postcode district and the neighbouring parts of Greater London. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about fire door hold-open devices and we will confirm the arrangements and the price in writing.

Space for materials and tools is limited at many addresses in Kilburn, especially on narrow or pedestrianised streets in Greater London. Larger door sets are delivered for the time of fitting, and access and parking restrictions are planned into the visit.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Camden Town (2.2 miles), Willesden (2.2 miles), Holloway (2.9 miles), Finchley (3.3 miles), Shepherd's Bush (3.5 miles), Kensington (3.6 miles).

What to think about for fire door hold-open devices in Kilburn

  • Older buildings in Kilburn may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
  • Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
  • Hard-wired magnets need a power supply near each door. In buildings in Kilburn where that is awkward, battery units avoid running new cables along finished corridors.
  • If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.

Fire door hold-open devices in Kilburn: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in Kilburn, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

For care homes, offices and schools in Kilburn, we survey, quote and fit alarm-linked hold-open devices. Get in touch to arrange a time that suits your building.

Fire door hold-open devices in Kilburn: questions

Which doors in my building in Kilburn can be held open?

That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.

Is there a guide price for fire door hold-open devices in Kilburn?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Kilburn confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

How soon can hold-open devices be fitted in Kilburn?

Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.

Do care homes in Kilburn use free-swing closers?

Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.

What does the free site survey in Kilburn involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for fire door hold-open devices, with drawings where the door type needs them.

What happens once the installation in Kilburn is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

Do businesses in Kilburn have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Fire door hold-open devices in Kilburn

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.