Covering Hammersmith and nearby
We do not keep premises in Hammersmith. Instead, enquiries about fire door hold-open devices come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the W6 and W14 postcode districts on a date that suits the site.
Victorian and Georgian terraces are common across London, and converted buildings in Hammersmith may have steps, narrow hallways or shared front doors. A home door opener or an operator on a communal door has to work within those limits, and the engineer checks what will fit.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Shepherd's Bush (0.8 miles), Chiswick (1.3 miles), Fulham (1.6 miles), Kensington (1.7 miles), Acton (2.3 miles), Putney (2.3 miles).
What to think about for fire door hold-open devices in Hammersmith
- Hard-wired magnets need a power supply near each door. In buildings in Hammersmith where that is awkward, battery units avoid running new cables along finished corridors.
- If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
- Older buildings in Hammersmith may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
- Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
- Schools and colleges in Hammersmith may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
Fire door hold-open devices in Hammersmith: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in Hammersmith, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Arrange your free hold-open device survey in Hammersmith today and receive a written quote with a fixed price. Nothing is fitted until you have accepted it.
Fire door hold-open devices in Hammersmith: questions
What will the survey in Hammersmith look at?
The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.
What is the guide price for fire door hold-open devices in Hammersmith?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Hammersmith confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do care homes in Hammersmith use free-swing closers?
Many do. A free-swing closer lets residents open their bedroom door without pushing against a closer, and it still shuts the door when the fire alarm operates. Whether it suits each room depends on the home's fire risk assessment and evacuation strategy, which we read before recommending any device.
Which doors in my building in Hammersmith can be held open?
That is decided by the fire risk assessment for the building, not by the installer. Many corridor, lounge and office doors can be held open on a device that releases on the alarm, while some stair and escape route doors cannot. If the assessment is unclear, check with your assessor before we finalise the quote.
What happens to the old door when a new one is fitted in Hammersmith?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What does the written quote for fire door hold-open devices in Hammersmith include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Which building regulations apply to a new automatic entrance in Hammersmith?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.