UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Greater London

Fire door hold-open devices in Catford

Whether your building in Catford has a modern addressable alarm or a simple conventional system, there is usually a hold-open option that works with it. We compare wired, radio and acoustic devices on a free survey and set out the choice in a fixed quote.

Town
Catford
Area
Greater London
Postcodes
SE6
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Catford and nearby

If your building is in Catford, or anywhere in the SE6 postcode district, we can arrange fire door hold-open devices. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

Space for materials and tools is limited at many addresses in Catford, especially on narrow or pedestrianised streets in Greater London. Larger door sets are delivered for the time of fitting, and access and parking restrictions are planned into the visit.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Lewisham (1.4 miles), Greenwich (2.3 miles), Beckenham (2.5 miles), Peckham (2.9 miles), Bromley (3.1 miles), Eltham (3.2 miles).

What to think about for fire door hold-open devices in Catford

  • Busy office corridors suit wall magnets that hold doors right back against the wall, out of the way of people and trolleys, until the alarm releases them.
  • Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
  • Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.
  • Hard-wired magnets need a power supply near each door. In buildings in Catford where that is awkward, battery units avoid running new cables along finished corridors.
  • Schools and colleges in Catford may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.

Fire door hold-open devices in Catford: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for fire door hold-open devices and book a survey in Catford.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Ask for a hold-open survey in Catford. We will check each door and the alarm system, then quote a fixed price with the right device for every opening.

Fire door hold-open devices in Catford: questions

How soon can hold-open devices be fitted in Catford?

Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.

Can you give me a price for fire door hold-open devices in Catford?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Catford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What will the survey in Catford look at?

The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.

Can you work with the fire alarm company that maintains our system in Catford?

Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.

What power supply is needed for fire door hold-open devices in Catford?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Can automatic doors be fitted to a listed building in Catford?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

Do businesses in Catford have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Fire door hold-open devices in Catford

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.