UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · Gloucestershire

Fire door hold-open devices in Kingswood

Care homes, offices and schools in Kingswood often have fire doors wedged open because they are too heavy for daily use. We replace the wedges with alarm-linked hold-open devices, chosen to suit each door, after a free survey and a fixed, itemised quote.

Town
Kingswood
Area
Gloucestershire
Postcodes
BS15
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Kingswood and nearby

We do not keep premises in Kingswood. Instead, enquiries about fire door hold-open devices come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the BS15 postcode district on a date that suits the site.

GP surgeries, dental practices and pharmacies in Kingswood often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Fishponds (2.1 miles), Keynsham (2.7 miles), Bristol (3.8 miles), Bedminster (4.2 miles), Clifton (4.8 miles), Yate (7.2 miles).

What to think about for fire door hold-open devices in Kingswood

  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
  • Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
  • If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
  • Schools and colleges in Kingswood may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
  • Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.

Fire door hold-open devices in Kingswood: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in England

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Kingswood.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

For care homes, offices and schools in Kingswood, we survey, quote and fit alarm-linked hold-open devices. Get in touch to arrange a time that suits your building.

Fire door hold-open devices in Kingswood: questions

Do you fit fire door hold-open devices in Kingswood?

Yes. We arrange surveys and installations in Kingswood through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.

Can you give me a price for fire door hold-open devices in Kingswood?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Kingswood confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What will the survey in Kingswood look at?

The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.

Will you test the hold-open devices before leaving our site in Kingswood?

Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.

What is the lead time for fire door hold-open devices in Kingswood?

Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.

What do you need from us for parking and access in Kingswood?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

Do businesses in Kingswood have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Fire door hold-open devices in Kingswood

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.