Covering Dunfermline and nearby
Engineers working under our management travel to addresses across the KY12 postcode district for fire door hold-open devices. There is no depot or showroom in Dunfermline; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Council offices, libraries, leisure centres and other public buildings in Dunfermline usually buy through procurement rules. Itemised written prices, method statements and the paperwork a buyer needs can all be provided, and the work is carried out by specialist engineers working under our management.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Rosyth (2.5 miles), Dalgety Bay (4.9 miles), Cowdenbeath (5.2 miles), South Queensferry (6.0 miles), Bo'ness (7.2 miles), Linlithgow (8.6 miles).
What to think about for fire door hold-open devices in Dunfermline
- Hard-wired magnets need a power supply near each door. In buildings in Dunfermline where that is awkward, battery units avoid running new cables along finished corridors.
- Schools and colleges in Dunfermline may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
- Think about who tests the fire alarm each week at your building in Dunfermline. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
- If the alarm panel has no spare outputs, a relay or an extra interface may be needed. Your alarm engineer can confirm this, and it is added to the quote once agreed.
- Older buildings in Dunfermline may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
Fire door hold-open devices in Dunfermline: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in Scotland
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the person responsible for fire safety under the Fire (Scotland) Act 2005.
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Dunfermline and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on fire door hold-open devices separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ask for a hold-open survey in Dunfermline. We will check each door and the alarm system, then quote a fixed price with the right device for every opening.
Fire door hold-open devices in Dunfermline: questions
Do you fit fire door hold-open devices in Dunfermline?
Yes. We arrange surveys and installations in Dunfermline through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
What will fire door hold-open devices in Dunfermline cost?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Dunfermline confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you work with the fire alarm company that maintains our system in Dunfermline?
Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.
Will you test the hold-open devices before leaving our site in Dunfermline?
Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.
What power supply is needed for fire door hold-open devices in Dunfermline?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What happens once the installation in Dunfermline is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do businesses in Dunfermline have to fit automatic doors?
No law requires automatic doors everywhere. Under the Equality Act 2010 service providers and employers must make reasonable adjustments for disabled people, and Scottish guidance says powered doors improve accessibility at entrances. An automatic door is often the practical answer.