Covering Milford Haven and nearby
Engineers working under our management travel to addresses across the SA73 postcode district for fire door hold-open devices. There is no depot or showroom in Milford Haven; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Small offices, community centres and village halls around Milford Haven tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Pembroke Dock (4.3 miles), Haverfordwest (6.7 miles).
What to think about for fire door hold-open devices in Milford Haven
- Care homes in Milford Haven usually want bedroom doors that residents can open easily. Free-swing closers suit this, provided the evacuation strategy for the home supports them.
- Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
- Schools and colleges in Milford Haven may want hold-open devices fitted during the holidays so corridors are not disrupted in term time. Fitting can be planned around term dates.
- Think about who tests the fire alarm each week at your building in Milford Haven. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
- Hard-wired magnets need a power supply near each door. In buildings in Milford Haven where that is awkward, battery units avoid running new cables along finished corridors.
Fire door hold-open devices in Milford Haven: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in Wales
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in Milford Haven, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Tell us about the fire doors that cause problems in Milford Haven. We will survey them free of charge and explain which hold-open options your alarm can support.
Fire door hold-open devices in Milford Haven: questions
Do you fit fire door hold-open devices in Milford Haven?
Yes. We arrange surveys and installations in Milford Haven through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.
What will fire door hold-open devices in Milford Haven cost?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Milford Haven confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What will the survey in Milford Haven look at?
The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.
How soon can hold-open devices be fitted in Milford Haven?
Once the quote is accepted, supply is typically 1 to 3 weeks, and fitting a few devices on one floor usually takes a day. Larger jobs are planned in stages so doors are never left without protection. Your quote shows the expected programme, and fitting dates are agreed with you before work starts.
What does the written quote for fire door hold-open devices in Milford Haven include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
How are payments structured for work in Milford Haven?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.