Covering Newton Aycliffe and nearby
Engineers working under our management travel to addresses across the DL5 postcode district for fire door hold-open devices. There is no depot or showroom in Newton Aycliffe; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Doors at quieter sites in Newton Aycliffe and elsewhere in County Durham can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for fire door hold-open devices (straight-line distance): Bishop Auckland (4.9 miles), Spennymoor (5.7 miles), Darlington (6.6 miles), Stockton-on-Tees (10.7 miles), Durham (10.9 miles), Billingham (11.5 miles).
What to think about for fire door hold-open devices in Newton Aycliffe
- Listed buildings and conservation areas can make new cable runs difficult. Radio-triggered battery units avoid most wiring, although the transmitter still needs a connection at the alarm panel.
- Hard-wired magnets need a power supply near each door. In buildings in Newton Aycliffe where that is awkward, battery units avoid running new cables along finished corridors.
- Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
- Think about who tests the fire alarm each week at your building in Newton Aycliffe. Adding a walk past the held-open doors to that test is the easiest way to confirm they release.
- Older buildings in Newton Aycliffe may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
Fire door hold-open devices in Newton Aycliffe: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Battery acoustic hold-open unit | £145 – £295 | per door, fitted, ex VAT |
| Hard-wired hold-open magnet linked to the fire alarm | £245 – £595 | per door, ex VAT; alarm panel work extra |
| Free-swing door closer linked to the fire alarm | £395 – £895 | per door, fitted, ex VAT |
Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.
Standards and rules in England
Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.
Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
How it works
- Describe what you need. Whether the job is fire door hold-open devices for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Newton Aycliffe.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Ask for a hold-open survey in Newton Aycliffe. We will check each door and the alarm system, then quote a fixed price with the right device for every opening.
Fire door hold-open devices in Newton Aycliffe: questions
Can you work with the fire alarm company that maintains our system in Newton Aycliffe?
Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.
How much should I budget for fire door hold-open devices in Newton Aycliffe?
Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Newton Aycliffe confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you test the hold-open devices before leaving our site in Newton Aycliffe?
Yes. Every door is released from fully open and checked to close and latch. Where the alarm connection is complete, the doors are also tested with the alarm itself. You receive a schedule of the doors and devices fitted, ready to keep with your fire safety records and weekly alarm test log.
What will the survey in Newton Aycliffe look at?
The engineer checks that each door closes and latches from fully open, the condition of the closer and seals, where the door rests when open, nearby power supplies and the alarm panel or radio options. We also ask to see the relevant part of the fire risk assessment, so the quote covers only doors that can be held open.
What do you need from us for parking and access in Newton Aycliffe?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Newton Aycliffe is agreed before work starts.
Which building regulations apply to a new automatic entrance in Newton Aycliffe?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.