UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Fire door hold-open devices · County Down

Fire door hold-open devices in Comber

If residents or staff in Comber struggle with heavy self-closing doors, a free-swing closer or an alarm-linked magnet can make them easy to use without weakening fire protection. Book a free survey and we will list the right device for every door.

Town
Comber
Area
County Down
Postcodes
BT23
Guide price
From £145 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Comber and nearby

Homes, businesses and public buildings throughout the BT23 postcode district can arrange fire door hold-open devices with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Comber for the job rather than working from premises in town.

Care homes in and around Comber often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.

Nearby towns we also list for fire door hold-open devices (straight-line distance): Newtownards (3.6 miles), Dundonald (3.7 miles), Holywood (7.0 miles), Belfast (8.0 miles), Bangor (8.3 miles), Newtownabbey (10.1 miles).

What to think about for fire door hold-open devices in Comber

  • Fire doors on stairs and protected escape routes need particular care. The fire risk assessment may allow some of them to be held open and not others, so pricing is door by door.
  • Older buildings in Comber may have fire doors that no longer close fully on their own. A hold-open device cannot fix that, so the survey checks closers, hinges and latches first.
  • Background noise matters for acoustic units. Kitchens, plant areas and busy receptions may be too loud for a unit that listens for the alarm, so a wired or radio device is often better there.
  • Doors that open too far from a wall for a wall magnet can use a floor-mounted unit or a magnet on an extension arm. The survey measures where each door rests when open.
  • Residential blocks often have communal corridor doors that residents prop open. Hold-open devices give the same convenience while letting the doors close when the alarm sounds.

Fire door hold-open devices in Comber: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £145 ex VAT.

ItemGuide priceNotes
Battery acoustic hold-open unit£145 – £295per door, fitted, ex VAT
Hard-wired hold-open magnet linked to the fire alarm£245 – £595per door, ex VAT; alarm panel work extra
Free-swing door closer linked to the fire alarm£395 – £895per door, fitted, ex VAT

Which hold-open device is suitable depends on your fire risk assessment. Linking to the fire alarm may need work by your alarm engineer.

Standards and rules in Northern Ireland

Hold-open devices and door release units linked to the fire alarm need regular testing as part of the building’s fire safety checks, and the results should be recorded.

Fire doors that are held open must close automatically when the fire alarm operates. Where hold-open devices can be used is decided by the fire risk assessment, which is the job of the person with fire safety duties under the Fire and Rescue Services (Northern Ireland) Order 2006.

How it works

  1. Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
  2. Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
  3. Quote in writing. You receive a fixed, itemised quote for fire door hold-open devices in Comber, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
  4. Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.

Arrange your free hold-open device survey in Comber today and receive a written quote with a fixed price. Nothing is fitted until you have accepted it.

Fire door hold-open devices in Comber: questions

Are battery hold-open units a good choice for older buildings in Comber?

Often they are. Radio and acoustic battery units avoid long cable runs, which helps in older or listed buildings and finished corridors. Acoustic units are only suitable where the fire risk assessment allows them and the alarm can be heard clearly at the door. Batteries need replacing at the interval the maker states.

What do you charge for fire door hold-open devices in Comber?

Our guide starts from £145 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Comber confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you work with the fire alarm company that maintains our system in Comber?

Yes, and for wired devices we usually need to. The connection at the alarm panel is made by, or agreed with, the engineer who looks after your alarm. We share the device details with them and agree the visits, so the alarm and the doors can be tested together once the work is finished.

Do you fit fire door hold-open devices in Comber?

Yes. We arrange surveys and installations in Comber through specialist engineers working under our management. They look at each door, its closer and the alarm system, recommend a device for each door and we send a fixed, itemised quote. The survey costs you nothing, and you are under no obligation to accept the quote.

Can automatic doors be fitted to a listed building in Comber?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

Do I need permission from a landlord or the council before work in Comber?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

What do the building regulations in Northern Ireland say about powered doors?

The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access is in Technical Booklet R, and new entrances need building control approval.

Next step

Fire door hold-open devices in Comber

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.