Covering Redhill and nearby
For automating an existing door, coverage around Redhill is set by postcode and includes the RH1 postcode district, as well as nearby addresses in Surrey. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Supermarkets and larger stores in and around Redhill often trade long hours, so work on their entrances is usually planned for early mornings or late evenings. Where a store has more than one entrance, keeping one in use while the other is worked on is part of the plan.
Nearby towns we also list for automating an existing door (straight-line distance): Reigate (1.5 miles), Horley (4.6 miles), Caterham (4.9 miles), Dorking (7.1 miles), Purley (7.1 miles), Epsom (7.6 miles).
What to think about for automating an existing door in Redhill
- Glass in a door that will be automated should be safety glass. Older doors in Redhill may have panes that need replacing before the work goes ahead.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
- Shop fronts on high streets in Redhill often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
- Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
Automating an existing door in Redhill: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is automating an existing door for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Redhill.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tell us about the door, how it is used and who uses it, and we will plan a retrofit for your building in Redhill.
Automating an existing door in Redhill: questions
Do you provide the paperwork for an automated door in Redhill?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
Is there a guide price for automating an existing door in Redhill?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Redhill confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you look after the door in Redhill once it is automated?
Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.
Can you automate the existing doors at our building in Redhill?
In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.
What happens once the installation in Redhill is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What is the lead time for automating an existing door in Redhill?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Who is responsible for automatic doors on escape routes in Redhill?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.