UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Somerset

Automating an existing door in Frome

Plenty of doors in Frome are sound but heavy or awkward to open. Fitting an operator to the door you already have is often quicker and cheaper than replacing it. We survey for free and tell you plainly whether automation will work.

Town
Frome
Area
Somerset
Postcodes
BA11
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Frome and nearby

Addresses anywhere in the BA11 postcode district can book automating an existing door through us. The engineer who attends works under our management and travels to the site. There is no branch in Frome, so the price, the booking and the paperwork all come from one place.

Independent businesses in Frome often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.

Nearby towns we also list for automating an existing door (straight-line distance): Warminster (6.4 miles), Trowbridge (8.0 miles), Bath (10.3 miles), Melksham (12.7 miles), Keynsham (14.9 miles), Kingswood (17.5 miles).

What to think about for automating an existing door in Frome

  • Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
  • Homes in Frome with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
  • Glass in a door that will be automated should be safety glass. Older doors in Frome may have panes that need replacing before the work goes ahead.
  • Doors facing the weather in exposed parts of Frome are pushed about by wind. The survey checks whether a low-energy operator will cope or a stronger unit is needed.

Automating an existing door in Frome: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in England

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Frome and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on automating an existing door separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Keep the door you have and make it automatic. Book a free survey in Frome and receive a written, itemised quote.

Automating an existing door in Frome: questions

Will automating our door in Frome need planning permission?

Fitting an operator to an existing door does not usually need planning permission, but a listed building may need consent for fixings or new switches on the outside. In a conservation area, mounting the operator inside often avoids any change to the street view. Check with the planning authority if in doubt.

Can you give me a price for automating an existing door in Frome?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Frome confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

How long will our door in Frome be out of use?

Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.

What if our door in Frome turns out to need replacing?

Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.

Is there a warranty on automating an existing door?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

How do you make sure the door works for disabled visitors in Frome?

We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.

Can a home in Frome get help paying for a door opener?

Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.

Next step

Automating an existing door in Frome

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.