Covering Spalding and nearby
We do not keep premises in Spalding. Instead, enquiries about automating an existing door come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the PE11 postcode district on a date that suits the site.
Many buildings in Spalding are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automating an existing door (straight-line distance): Boston (14.1 miles), Peterborough (15.3 miles), Wisbech (15.5 miles), Stamford (16.8 miles), Sleaford (18.1 miles), March (19.1 miles).
What to think about for automating an existing door in Spalding
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
- Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
- Schools and community buildings in Spalding may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
- Homes in Spalding with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
- Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
Automating an existing door in Spalding: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Spalding.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Get a fixed price for automating a door in Spalding. The quote covers the operator, safety devices, controls and any work the door needs first.
Automating an existing door in Spalding: questions
Can you look after the door in Spalding once it is automated?
Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.
Is there a guide price for automating an existing door in Spalding?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Spalding confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you provide the paperwork for an automated door in Spalding?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
What if our door in Spalding turns out to need replacing?
Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.
What does the written quote for automating an existing door in Spalding include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What is the lead time for automating an existing door in Spalding?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Spalding?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.