Covering Burnley and nearby
From shops and surgeries to schools, care homes and private houses, any building in the BB10 and BB11 postcode districts can be covered for automating an existing door. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Housing providers and managing agents in Burnley look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.
Nearby towns we also list for automating an existing door (straight-line distance): Nelson (2.7 miles), Colne (4.8 miles), Accrington (6.0 miles), Rawtenstall (7.2 miles), Blackburn (10.8 miles), Ramsbottom (11.1 miles).
What to think about for automating an existing door in Burnley
- Shop fronts on high streets in Burnley often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
- Glass in a door that will be automated should be safety glass. Older doors in Burnley may have panes that need replacing before the work goes ahead.
- Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
Automating an existing door in Burnley: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Describe what you need. Whether the job is automating an existing door for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Burnley.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Want to automate an existing door in Burnley? Start with a free survey, and decide once you have the fixed, itemised quote in front of you.
Automating an existing door in Burnley: questions
Can you automate a fire door at our premises in Burnley?
Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.
What will automating an existing door in Burnley cost?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Burnley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if our door in Burnley turns out to need replacing?
Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.
How long will our door in Burnley be out of use?
Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.
How do you make sure the door works for disabled visitors in Burnley?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Can automatic doors be fitted to a listed building in Burnley?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Do businesses in Burnley have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.