UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Hertfordshire

Automating an existing door in Hemel Hempstead

Shops, offices and schools in Hemel Hempstead often have aluminium or timber doors that are fine apart from the effort needed to open them. A retrofit operator removes that effort and leaves the frontage looking the same.

Town
Hemel Hempstead
Area
Hertfordshire
Postcodes
HP1, HP2, HP3
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Hemel Hempstead and nearby

Addresses anywhere in the HP1, HP2 and HP3 postcode districts can book automating an existing door through us. The engineer who attends works under our management and travels to the site. There is no branch in Hemel Hempstead, so the price, the booking and the paperwork all come from one place.

Weather matters for entrances that face open car parks, which is common on retail and business parks around Hemel Hempstead and elsewhere in Hertfordshire. Exposed doors can be pushed by wind and let heat escape, so draught lobbies, good seals and correctly set sensors are worth considering.

Nearby towns we also list for automating an existing door (straight-line distance): Berkhamsted (5.0 miles), St Albans (5.0 miles), Harpenden (5.9 miles), Watford (7.2 miles), Chesham (7.4 miles), Rickmansworth (8.0 miles).

What to think about for automating an existing door in Hemel Hempstead

  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
  • Homes in Hemel Hempstead with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
  • Schools and community buildings in Hemel Hempstead may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
  • Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
  • Older buildings in Hemel Hempstead often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.

Automating an existing door in Hemel Hempstead: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in England

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Hemel Hempstead.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Keep the door you have and make it automatic. Book a free survey in Hemel Hempstead and receive a written, itemised quote.

Automating an existing door in Hemel Hempstead: questions

Can you look after the door in Hemel Hempstead once it is automated?

Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.

What is the guide price for automating an existing door in Hemel Hempstead?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Hemel Hempstead confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you automate a front door at a house in Hemel Hempstead?

Yes. Front doors at home are often automated for wheelchair users and people with limited grip, usually with an electric keep or lock so the door locks itself as it closes. Home prices are quoted including VAT, and the survey is free.

How long will our door in Hemel Hempstead be out of use?

Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.

Do you service doors in Hemel Hempstead after installing them?

Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.

Can automatic doors be fitted to a listed building in Hemel Hempstead?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

Can a home in Hemel Hempstead get help paying for a door opener?

Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.

Next step

Automating an existing door in Hemel Hempstead

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.