Covering Yateley and nearby
Addresses anywhere in the GU46 postcode district can book automating an existing door through us. The engineer who attends works under our management and travels to the site. There is no branch in Yateley, so the price, the booking and the paperwork all come from one place.
Independent businesses in Yateley often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for automating an existing door (straight-line distance): Sandhurst (1.9 miles), Crowthorne (2.5 miles), Camberley (3.8 miles), Fleet (4.1 miles), Farnborough (4.7 miles), Wokingham (4.7 miles).
What to think about for automating an existing door in Yateley
- Homes in Yateley with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
- Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
- Glass in a door that will be automated should be safety glass. Older doors in Yateley may have panes that need replacing before the work goes ahead.
- Older buildings in Yateley often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
- Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
Automating an existing door in Yateley: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Yateley.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Ask us to look at the doors at your premises in Yateley. If a retrofit makes sense, you get a fixed quote, and if replacement is better, we explain why.
Automating an existing door in Yateley: questions
Can you automate a fire door at our premises in Yateley?
Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.
What is the guide price for automating an existing door in Yateley?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Yateley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will automating our door in Yateley need planning permission?
Fitting an operator to an existing door does not usually need planning permission, but a listed building may need consent for fixings or new switches on the outside. In a conservation area, mounting the operator inside often avoids any change to the street view. Check with the planning authority if in doubt.
How long will our door in Yateley be out of use?
Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.
Can automatic doors be fitted to a listed building in Yateley?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Do I need permission from a landlord or the council before work in Yateley?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Who is responsible for automatic doors on escape routes in Yateley?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.