Covering Gosport and nearby
Engineers working under our management travel to addresses across the PO12 and PO13 postcode districts for automating an existing door. There is no depot or showroom in Gosport; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Town-centre buildings in Gosport range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for automating an existing door (straight-line distance): Portsmouth (1.7 miles), Fareham (4.5 miles), Waterlooville (7.3 miles), Havant (7.6 miles), Emsworth (9.1 miles), Hedge End (11.0 miles).
What to think about for automating an existing door in Gosport
- Older buildings in Gosport often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
- Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
- Doors facing the weather in exposed parts of Gosport are pushed about by wind. The survey checks whether a low-energy operator will cope or a stronger unit is needed.
- Shop fronts on high streets in Gosport often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
Automating an existing door in Gosport: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is automating an existing door for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Gosport.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Ask us to look at the doors at your premises in Gosport. If a retrofit makes sense, you get a fixed quote, and if replacement is better, we explain why.
Automating an existing door in Gosport: questions
Can you automate the existing doors at our building in Gosport?
In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.
How much should I budget for automating an existing door in Gosport?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Gosport confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if our door in Gosport turns out to need replacing?
Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.
Can you look after the door in Gosport once it is automated?
Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.
Do I need permission from a landlord or the council before work in Gosport?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
How do you make sure the door works for disabled visitors in Gosport?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Can a home in Gosport get help paying for a door opener?
Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.