UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Greater London

Automating an existing door in Edgware

If you would rather keep your existing door in Edgware than replace it, we can usually add a swing or sliding operator to it. The door is tested and documented at handover, along with the paperwork that comes with a newly automated door.

Town
Edgware
Area
Greater London
Postcodes
HA8
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Edgware and nearby

Our coverage of Edgware takes in the HA8 postcode district and the neighbouring parts of Greater London. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automating an existing door and we will confirm the arrangements and the price in writing.

Security matters on busy London streets, so entrances in Edgware often need doors that lock firmly at night and work with alarms, shutters or access control. The operator, the locking and any shutter are planned together so they work in the right order.

Nearby towns we also list for automating an existing door (straight-line distance): Borehamwood (2.9 miles), Harrow (3.4 miles), Finchley (3.5 miles), Barnet (4.1 miles), Bushey (4.2 miles), Wembley (4.3 miles).

What to think about for automating an existing door in Edgware

  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
  • Shop fronts on high streets in Edgware often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
  • Glass in a door that will be automated should be safety glass. Older doors in Edgware may have panes that need replacing before the work goes ahead.
  • Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
  • Homes in Edgware with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.

Automating an existing door in Edgware: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in England

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Edgware and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on automating an existing door separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Want to automate an existing door in Edgware? Start with a free survey, and decide once you have the fixed, itemised quote in front of you.

Automating an existing door in Edgware: questions

Do you provide the paperwork for an automated door in Edgware?

Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.

Is there a guide price for automating an existing door in Edgware?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Edgware confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you automate a front door at a house in Edgware?

Yes. Front doors at home are often automated for wheelchair users and people with limited grip, usually with an electric keep or lock so the door locks itself as it closes. Home prices are quoted including VAT, and the survey is free.

What if our door in Edgware turns out to need replacing?

Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.

Do I need permission from a landlord or the council before work in Edgware?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

Can installation in Edgware happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Can a home in Edgware get help paying for a door opener?

Possibly. In England a Disabled Facilities Grant of up to £30,000 can fund adaptations that make it easier to get in and out of a home. It is means-tested and must be approved by the council before work starts, so ask your council and occupational therapist.

Next step

Automating an existing door in Edgware

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.