UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Dorset

Automating an existing door in Bournemouth

If you would rather keep your existing door in Bournemouth than replace it, we can usually add a swing or sliding operator to it. The door is tested and documented at handover, along with the paperwork that comes with a newly automated door.

Town
Bournemouth
Area
Dorset
Postcodes
BH1, BH2, BH3, BH4, BH7, BH10
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Bournemouth and nearby

We do not keep premises in Bournemouth. Instead, enquiries about automating an existing door come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the BH1, BH2, BH3, BH4, BH7 and BH10 postcode districts on a date that suits the site.

Access in a city centre needs planning. Loading bays, permit parking, pedestrianised streets and delivery windows all affect when an engineer can unload, so a visit to Bournemouth is booked around them and any restrictions are noted in advance.

Nearby towns we also list for automating an existing door (straight-line distance): Christchurch (4.4 miles), Poole (4.6 miles), Ferndown (6.1 miles), New Milton (9.7 miles), Totton (21.8 miles), Hythe (23.0 miles).

What to think about for automating an existing door in Bournemouth

  • Shop fronts on high streets in Bournemouth often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
  • Schools and community buildings in Bournemouth may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
  • Check how the door hangs now. A door that drops, rubs on the floor or needs a shoulder to close will need its hinges or frame sorted before an operator goes on.
  • Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
  • Listed buildings and conservation areas in Bournemouth may need consent for an operator on an original door. Mounting it on the inside face usually keeps the street view the same.

Automating an existing door in Bournemouth: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bournemouth.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Ask us to look at the doors at your premises in Bournemouth. If a retrofit makes sense, you get a fixed quote, and if replacement is better, we explain why.

Automating an existing door in Bournemouth: questions

How long will our door in Bournemouth be out of use?

Usually half a day to a day per door. Where hinges, locks or glass are being changed as well, it can take longer. We plan the work so the building stays usable, and agree any out-of-hours working in the quote.

What price range should I expect for automating an existing door in Bournemouth?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Bournemouth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Do you provide the paperwork for an automated door in Bournemouth?

Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.

Can you automate a fire door at our premises in Bournemouth?

Usually, using an operator designed for fire doors and wired to the fire alarm so the door closes when the alarm operates. We check the door's rating and condition first. A fire door that does not close and seal properly needs repairing before an operator goes on.

Can automatic doors be fitted to a listed building in Bournemouth?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

What does the written quote for automating an existing door in Bournemouth include?

The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.

Who is responsible for automatic doors on escape routes in Bournemouth?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Automating an existing door in Bournemouth

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.