UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · County Tyrone

Automating an existing door in Omagh

Before any operator goes on a door in Omagh, we check whether the door is worth automating. Sometimes new hinges or a lock are all it needs. Sometimes replacement is better value, and we will say so.

Town
Omagh
Area
County Tyrone
Postcodes
BT78
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Omagh and nearby

If your building is in Omagh, or anywhere in the BT78 postcode district, we can arrange automating an existing door. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.

GP surgeries, dental practices and pharmacies in Omagh often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for automating an existing door (straight-line distance): Irvinestown (16.2 miles), Strabane (16.9 miles), Enniskillen (22.3 miles), Cookstown (22.4 miles), Dungannon (22.4 miles), Lisnaskea (24.9 miles).

What to think about for automating an existing door in Omagh

  • Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
  • Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
  • Power is needed at the head of the door. If there is no supply close by, an electrician will need to run one, ideally hidden in trunking or the wall.
  • Shop fronts on high streets in Omagh often have narrow aluminium frames. The survey checks the transom can carry the operator without flexing, and whether it needs reinforcing.
  • Older buildings in Omagh often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.

Automating an existing door in Omagh: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in Northern Ireland

In Northern Ireland, disability access duties come from the Disability Discrimination Act 1995, because the Equality Act 2010 does not apply there. Service providers and employers are expected to make reasonable adjustments, and an automatic door is a common one at entrances. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access to buildings is in Technical Booklet R, and building control approval is needed for new entrances.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Omagh.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Get a fixed price for automating a door in Omagh. The quote covers the operator, safety devices, controls and any work the door needs first.

Automating an existing door in Omagh: questions

Will automating our door in Omagh need planning permission?

Fitting an operator to an existing door does not usually need planning permission, but a listed building may need consent for fixings or new switches on the outside. In a conservation area, mounting the operator inside often avoids any change to the street view. Check with the planning authority if in doubt.

What price range should I expect for automating an existing door in Omagh?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Omagh confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

What if our door in Omagh turns out to need replacing?

Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.

Can you automate the existing doors at our building in Omagh?

In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.

Can installation in Omagh happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Will the building stay secure while the entrance is being changed?

We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Omagh is agreed before work starts.

What do the building regulations in Northern Ireland say about powered doors?

The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access is in Technical Booklet R, and new entrances need building control approval.

Next step

Automating an existing door in Omagh

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.