Covering Portadown and nearby
We do not keep premises in Portadown. Instead, enquiries about automating an existing door come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the BT62 and BT63 postcode districts on a date that suits the site.
Independent businesses in Portadown often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for automating an existing door (straight-line distance): Craigavon (2.8 miles), Lurgan (5.4 miles), Banbridge (8.2 miles), Armagh (10.3 miles), Dungannon (14.1 miles), Newry (17.4 miles).
What to think about for automating an existing door in Portadown
- If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
- Think about how the door is locked. If it is locked by key every night, an electric lock or keep may be worth adding so the door can be secured without switching the operator off.
- Homes in Portadown with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
- Find out whether the door is a fire door. If it is, the operator must suit fire doors and be wired so the door closes when the alarm sounds.
- Doors facing the weather in exposed parts of Portadown are pushed about by wind. The survey checks whether a low-energy operator will cope or a stronger unit is needed.
Automating an existing door in Portadown: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing swing door | £1,795 – £2,995 | installed, ex VAT; homes £2,154 – £3,594 inc VAT |
| Full-energy operator on an existing swing door, with safety sensors | £2,495 – £3,995 | installed, ex VAT; homes £2,994 – £4,794 inc VAT |
| Operators on an existing pair of swing doors | £3,795 – £6,495 | installed, ex VAT; homes £4,554 – £7,794 inc VAT |
| Automating an existing manual sliding door or screen | £2,995 – £5,495 | installed, ex VAT; homes £3,594 – £6,594 inc VAT |
Standards and rules in Northern Ireland
In Northern Ireland, disability access duties come from the Disability Discrimination Act 1995, because the Equality Act 2010 does not apply there. Service providers and employers are expected to make reasonable adjustments, and an automatic door is a common one at entrances. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Northern Ireland machinery, including a new or converted powered door, carries the CE marking (with UKNI added where a UK body carried out the conformity assessment), and the EU Machinery Regulation applies there from 20 January 2027.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Portadown and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automating an existing door separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Keep the door you have and make it automatic. Book a free survey in Portadown and receive a written, itemised quote.
Automating an existing door in Portadown: questions
Can you automate the existing doors at our building in Portadown?
In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.
How are prices worked out for automating an existing door in Portadown?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Portadown confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if our door in Portadown turns out to need replacing?
Then we will say so and explain why. If you want to go ahead, we can quote a new automatic door, or a new door ready for an operator. If both options are reasonable, we price each so you can choose, and the survey costs nothing either way.
Do you provide the paperwork for an automated door in Portadown?
Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.
What does the written quote for automating an existing door in Portadown include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
What power supply is needed for automating an existing door in Portadown?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
What do the building regulations in Northern Ireland say about powered doors?
The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access is in Technical Booklet R, and new entrances need building control approval.