UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automating an existing door · Scotland

Automating an existing door in Aberdeen and Aberdeenshire

Shops, offices and schools in Aberdeen and Aberdeenshire often have aluminium or timber doors that are fine apart from the effort needed to open them. A retrofit operator removes that effort and leaves the frontage looking the same.

Area
Aberdeen and Aberdeenshire
Nation
Scotland
Towns listed
7
Guide price
From £1,795 ex VAT (£2,154 inc VAT)
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Coverage across Aberdeen and Aberdeenshire

For automating an existing door anywhere in Aberdeen and Aberdeenshire, you deal with one contracting party and one written price. We organise the visit, brief the engineer, who works under our management, and keep the paperwork together afterwards. Below you will find the towns we list in this part of Scotland, 7 in all; if your address sits outside them, the arrangements are exactly the same.

Towns listed in Aberdeen and Aberdeenshire: Aberdeen, Peterhead, Inverurie, Fraserburgh, Westhill, Stonehaven, Ellon.

What to think about for automating an existing door in Aberdeen and Aberdeenshire

  • Older buildings in Aberdeen and Aberdeenshire often have heavy timber doors on floor springs. Some floor springs can be adapted, but many need replacing with hinges, which adds to the cost.
  • Homes in Aberdeen and Aberdeenshire with uPVC or composite doors can usually be automated, but the multipoint lock needs to work smoothly first. A stiff lock is best fixed before fitting.
  • Schools and community buildings in Aberdeen and Aberdeenshire may prefer the work done in holidays or after hours. Ask for any out-of-hours working to be priced in the quote.
  • If the door is on an escape route, keep the existing panic or emergency hardware working. The operator should not stop the door opening by hand in an emergency.
  • Glass in a door that will be automated should be safety glass. Older doors in Aberdeen and Aberdeenshire may have panes that need replacing before the work goes ahead.

Automating an existing door in Aberdeen and Aberdeenshire: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT (£2,154 inc VAT).

ItemGuide priceNotes
Low-energy operator on an existing swing door£1,795 – £2,995installed, ex VAT; homes £2,154 – £3,594 inc VAT
Full-energy operator on an existing swing door, with safety sensors£2,495 – £3,995installed, ex VAT; homes £2,994 – £4,794 inc VAT
Operators on an existing pair of swing doors£3,795 – £6,495installed, ex VAT; homes £4,554 – £7,794 inc VAT
Automating an existing manual sliding door or screen£2,995 – £5,495installed, ex VAT; homes £3,594 – £6,594 inc VAT

Standards and rules in Scotland

Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automating an existing door and book a survey in Aberdeen and Aberdeenshire.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Want to automate an existing door in Aberdeen and Aberdeenshire? Start with a free survey, and decide once you have the fixed, itemised quote in front of you.

Automating an existing door in Aberdeen and Aberdeenshire: questions

Can you automate the existing doors at our building in Aberdeen and Aberdeenshire?

In most cases, yes. We check each door at a free survey, including the hinges, frame, glass, locks and power, and then quote a fixed price. If a door is not a good candidate, we explain why and what it would take to fix it, or quote a replacement instead.

Is there a guide price for automating an existing door in Aberdeen and Aberdeenshire?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. For homes that is from £2,154 including VAT. The free site survey in Aberdeen and Aberdeenshire confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you look after the door in Aberdeen and Aberdeenshire once it is automated?

Yes. We can arrange servicing at intervals that suit how much the door is used, with the operator, safety devices and hinges checked and a written record left. Each visit has its price confirmed in writing before an engineer attends.

Do you provide the paperwork for an automated door in Aberdeen and Aberdeenshire?

Yes. Motorising a manual door brings manufacturer's duties for the completed powered door, so when we automate a door we provide the risk assessment, test record, settings and conformity paperwork at handover. Keep them with your building records, as insurers, inspectors and future service engineers may ask to see them.

What do you need from us for parking and access in Aberdeen and Aberdeenshire?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

What happens to the old door when a new one is fitted in Aberdeen and Aberdeenshire?

If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.

Can a home in Aberdeen and Aberdeenshire get help paying for a door opener?

Scotland does not have Disabled Facilities Grants. Councils help through their Scheme of Assistance, which can include a grant for essential permanent adaptations. Ask your council whether a powered door opener could be included.

Next step

Automating an existing door in Aberdeen and Aberdeenshire

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.