Covering Biddulph and nearby
Engineers working under our management travel to addresses across the ST8 postcode district for curved automatic doors. There is no depot or showroom in Biddulph; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Libraries, health centres and council buildings in Biddulph still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.
Nearby towns we also list for curved automatic doors (straight-line distance): Kidsgrove (3.3 miles), Congleton (3.5 miles), Leek (6.4 miles), Stoke-on-Trent (7.8 miles), Sandbach (8.0 miles), Newcastle-under-Lyme (8.4 miles).
What to think about for curved automatic doors in Biddulph
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Staffordshire, think about how rainwater will leave the canopy without running down the glass into the threshold.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
- Consider a spare curved panel for busy entrances in Biddulph. It costs more at the start, but a broken leaf can then be replaced without waiting for new glass to be bent.
- Hotel entrances in Biddulph see bursts of arrivals with luggage and coach parties. Choose a diameter and clear opening that let several people and cases pass together without waiting for a second cycle.
- A half-round door often projects beyond the existing building line. In town centres around Biddulph, check early whether that affects the pavement, the highway boundary or the need for planning permission.
Curved automatic doors in Biddulph: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Describe what you need. Whether the job is curved automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Biddulph.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Get a guide figure from the price tool, then arrange a survey in Biddulph to turn it into a fixed written quote for curved automatic doors.
Curved automatic doors in Biddulph: questions
How long does a curved door project in Biddulph take?
Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.
What price range should I expect for curved automatic doors in Biddulph?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Biddulph confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a curved door in Biddulph replace a revolving door?
In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.
Can you work with our architect or main contractor in Biddulph?
Yes. Many curved doors are part of a larger refurbishment or new build. We can work from the architect's setting-out drawings, agree the structural opening, canopy and floor details with the contractor, and fit the door at the right stage of the programme so finished floors and glazing are protected.
How much disruption should we expect while the work is done in Biddulph?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Do you service doors in Biddulph after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Biddulph?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.