UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Curved automatic doors · Rutland

Curved automatic doors in Ketton

We supply and install curved automatic doors for commercial buildings in Ketton and elsewhere in England. Each project starts with a measured survey and approved drawings, and finishes with the door commissioned, tested and explained to the people who will run it.

Town
Ketton
Area
Rutland
Postcodes
PE9
Guide price
From £14,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Ketton and nearby

Sites across the PE9 postcode district are visited by specialist automatic door engineers working under our management. They travel to Ketton for curved automatic doors as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.

GP surgeries, dental practices and pharmacies in Ketton often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for curved automatic doors (straight-line distance): Stamford (3.4 miles), Uppingham (7.6 miles), Oakham (8.0 miles), Corby (10.7 miles), Peterborough (13.4 miles), Melton Mowbray (16.9 miles).

What to think about for curved automatic doors in Ketton

  • Curved entrances in Ketton are often installed during a wider refurbishment. Working with the main contractor on dates, power and protection of the finished floor helps the door go in once, without return visits.
  • Curved doors on landmark buildings in Ketton are often lit at night. Plan canopy lighting, signage and any warm air curtain alongside the door, so cables and fixings are in place before the glass goes in.
  • The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
  • Busy entrances with curved floor guides collect grit from the street. A good matwell and regular cleaning of the guide channels keep the leaves running smoothly around the arc.
  • Curved glass cannot be cut to size on site. Allow for the longer lead time in any refurbishment programme, and do not book shopfitters or floor layers for the entrance until the door has a delivery date.

Curved automatic doors in Ketton: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.

ItemGuide priceNotes
Half-round curved sliding entrancefrom £14,995installed, ex VAT; priced on survey
Full-round curved entrance or large radiusPriced on surveyglass and track are made to the radius
Battery backup for power-cut operation£395 – £695per door, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.

Standards and rules in England

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Ketton and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on curved automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Send us photos of the frontage in Ketton and any drawings you have, and we will arrange a free survey for a curved automatic entrance.

Curved automatic doors in Ketton: questions

Will we need planning permission for a curved entrance in Ketton?

Possibly. A curved door that changes the look of the frontage or projects beyond the building line may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We raise the question at survey and can supply drawings and product details for an application.

How are prices worked out for curved automatic doors in Ketton?

Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Ketton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

How long does a curved door project in Ketton take?

Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.

Is the site survey for a curved door in Ketton free?

Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.

Can installation in Ketton happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Is there a warranty on curved automatic doors?

Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.

Do businesses in Ketton have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Curved automatic doors in Ketton

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.