Covering Scarborough and nearby
Addresses anywhere in the YO11 and YO12 postcode districts can book curved automatic doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Scarborough, so the price, the booking and the paperwork all come from one place.
Around Scarborough there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for curved automatic doors (straight-line distance): Bridlington (16.1 miles), Beverley (30.0 miles).
What to think about for curved automatic doors in Scarborough
- Busy entrances with curved floor guides collect grit from the street. A good matwell and regular cleaning of the guide channels keep the leaves running smoothly around the arc.
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across North Yorkshire, think about how rainwater will leave the canopy without running down the glass into the threshold.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
- Hotel entrances in Scarborough see bursts of arrivals with luggage and coach parties. Choose a diameter and clear opening that let several people and cases pass together without waiting for a second cycle.
- Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
Curved automatic doors in Scarborough: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Scarborough.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Planning a landmark entrance in Scarborough? Contact us early, so the survey, drawings and curved glass all fit your programme.
Curved automatic doors in Scarborough: questions
Is the site survey for a curved door in Scarborough free?
Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.
Can you give me a price for curved automatic doors in Scarborough?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Scarborough confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can the curved door in Scarborough be installed while we stay open?
Often, yes, for a half-round replacement, with the opening secured overnight and the work planned around quieter hours. A full-round door with a new roof usually needs the entrance closed for longer, so a second entrance is helpful. We agree the arrangements with you before the date is fixed.
Do you install curved automatic doors in Scarborough?
Yes. We arrange half-round, full-round and segmental curved doors for buildings in Scarborough and across North Yorkshire. The survey, installation and commissioning are carried out by specialist automatic door engineers working under our management, and we remain the contracting party from the first drawing to handover.
Do you service doors in Scarborough after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What power supply is needed for curved automatic doors in Scarborough?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Scarborough?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.