Covering Gorleston-on-Sea and nearby
From shops and surgeries to schools, care homes and private houses, any building in the NR31 postcode district can be covered for curved automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Many buildings in Gorleston-on-Sea are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for curved automatic doors (straight-line distance): Great Yarmouth (2.4 miles), Lowestoft (6.8 miles), Norwich (18.5 miles), Wymondham (25.8 miles).
What to think about for curved automatic doors in Gorleston-on-Sea
- Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
- Listed buildings and conservation areas in Gorleston-on-Sea may need consent for a curved entrance. Drawings showing the radius, frame colour and canopy detail help the planning authority understand the proposal.
- Curved glass cannot be cut to size on site. Allow for the longer lead time in any refurbishment programme, and do not book shopfitters or floor layers for the entrance until the door has a delivery date.
- Busy entrances with curved floor guides collect grit from the street. A good matwell and regular cleaning of the guide channels keep the leaves running smoothly around the arc.
Curved automatic doors in Gorleston-on-Sea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Gorleston-on-Sea.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Talk to us about curved doors for your hotel, store or civic building in Gorleston-on-Sea. The survey is free and there is no obligation to proceed.
Curved automatic doors in Gorleston-on-Sea: questions
Who looks after a curved door in Gorleston-on-Sea once it is fitted?
You can arrange servicing with us, with each visit priced in writing beforehand. Curved doors need regular attention to the floor guides and carriages that follow the arc. A trained engineer should check the safety functions at least once a year, and busy hotel or store entrances are usually serviced more often.
What do you charge for curved automatic doors in Gorleston-on-Sea?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Gorleston-on-Sea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a curved door in Gorleston-on-Sea replace a revolving door?
In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.
How long does a curved door project in Gorleston-on-Sea take?
Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.
Do you service doors in Gorleston-on-Sea after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What is the lead time for curved automatic doors in Gorleston-on-Sea?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Gorleston-on-Sea?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.