Covering Birkenhead and nearby
Engineers working under our management travel to addresses across the CH41, CH42, CH43 and CH49 postcode districts for curved automatic doors. There is no depot or showroom in Birkenhead; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Hospitals, universities and large public buildings in and around Birkenhead often have dozens of automatic doors on one estate, from main entrances to ward and corridor doors. Grouping surveys, servicing and inspections across a site keeps records in one place and visits efficient.
Nearby towns we also list for curved automatic doors (straight-line distance): Liverpool (1.9 miles), Wallasey (2.9 miles), Bebington (3.0 miles), Moreton (4.2 miles), Bootle (5.1 miles), Litherland (5.3 miles).
What to think about for curved automatic doors in Birkenhead
- Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
- Hotel entrances in Birkenhead see bursts of arrivals with luggage and coach parties. Choose a diameter and clear opening that let several people and cases pass together without waiting for a second cycle.
- Curved doors on landmark buildings in Birkenhead are often lit at night. Plan canopy lighting, signage and any warm air curtain alongside the door, so cables and fixings are in place before the glass goes in.
- Consider a spare curved panel for busy entrances in Birkenhead. It costs more at the start, but a broken leaf can then be replaced without waiting for new glass to be bent.
Curved automatic doors in Birkenhead: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is curved automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Birkenhead.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Planning a landmark entrance in Birkenhead? Contact us early, so the survey, drawings and curved glass all fit your programme.
Curved automatic doors in Birkenhead: questions
Do you install curved automatic doors in Birkenhead?
Yes. We arrange half-round, full-round and segmental curved doors for buildings in Birkenhead and across Merseyside. The survey, installation and commissioning are carried out by specialist automatic door engineers working under our management, and we remain the contracting party from the first drawing to handover.
Can you give me a price for curved automatic doors in Birkenhead?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Birkenhead confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can a curved door in Birkenhead replace a revolving door?
In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.
How long does a curved door project in Birkenhead take?
Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.
Do you service doors in Birkenhead after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Can automatic doors be fitted to a listed building in Birkenhead?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Birkenhead?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.