Covering Deal and nearby
Sites across the CT14 postcode district are visited by specialist automatic door engineers working under our management. They travel to Deal for curved automatic doors as bookings come in, so dates depend on the diary rather than a fixed local team, and we give you the earliest date we can offer when you book.
Small offices, community centres and village halls around Deal tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for curved automatic doors (straight-line distance): Dover (7.8 miles), Ramsgate (7.8 miles), Broadstairs (9.5 miles), Margate (11.0 miles), Folkestone (14.1 miles), Canterbury (14.5 miles).
What to think about for curved automatic doors in Deal
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
- Curved entrances in Deal are often installed during a wider refurbishment. Working with the main contractor on dates, power and protection of the finished floor helps the door go in once, without return visits.
- Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
- A half-round door often projects beyond the existing building line. In town centres around Deal, check early whether that affects the pavement, the highway boundary or the need for planning permission.
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Kent, think about how rainwater will leave the canopy without running down the glass into the threshold.
Curved automatic doors in Deal: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Deal and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on curved automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
To replace a tired entrance in Deal with a curved door, tell us the width, the depth available in front of the building and how busy it gets.
Curved automatic doors in Deal: questions
Can a curved door in Deal replace a revolving door?
In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.
What price range should I expect for curved automatic doors in Deal?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Deal confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the site survey for a curved door in Deal free?
Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.
Can the curved door in Deal be installed while we stay open?
Often, yes, for a half-round replacement, with the opening secured overnight and the work planned around quieter hours. A full-round door with a new roof usually needs the entrance closed for longer, so a second entrance is helpful. We agree the arrangements with you before the date is fixed.
Can automatic doors be fitted to a listed building in Deal?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What do you need from us for parking and access in Deal?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Who is responsible for automatic doors on escape routes in Deal?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.