Covering Sandown and nearby
From shops and surgeries to schools, care homes and private houses, any building in the PO36 postcode district can be covered for curved automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Island addresses such as Sandown need more planning than the mainland. Photos, measurements and door details are gathered in advance, so that a survey and a later installation, or a repair visit, can each be done in as few trips as possible.
Nearby towns we also list for curved automatic doors (straight-line distance): Ryde (5.4 miles), Newport (6.7 miles), Cowes (9.7 miles).
What to think about for curved automatic doors in Sandown
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across the Isle of Wight, think about how rainwater will leave the canopy without running down the glass into the threshold.
- Curved glass cannot be cut to size on site. Allow for the longer lead time in any refurbishment programme, and do not book shopfitters or floor layers for the entrance until the door has a delivery date.
- A half-round door often projects beyond the existing building line. In town centres around Sandown, check early whether that affects the pavement, the highway boundary or the need for planning permission.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
- Busy entrances with curved floor guides collect grit from the street. A good matwell and regular cleaning of the guide channels keep the leaves running smoothly around the arc.
Curved automatic doors in Sandown: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. For island addresses the survey is still free; travel and accommodation for the installation itself are shown as a separate line in the quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Sandown.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Planning a landmark entrance in Sandown? Contact us early, so the survey, drawings and curved glass all fit your programme.
Curved automatic doors in Sandown: questions
Can a curved door in Sandown replace a revolving door?
In many cases, yes. A full-round curved door gives similar draught protection with a straight, open path through, which many visitors find easier than a revolving door. The survey checks whether the existing drum position, floor recess and canopy can be reused or need altering.
What is the guide price for curved automatic doors in Sandown?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Sandown confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who looks after a curved door in Sandown once it is fitted?
You can arrange servicing with us, with each visit priced in writing beforehand. Curved doors need regular attention to the floor guides and carriages that follow the arc. A trained engineer should check the safety functions at least once a year, and busy hotel or store entrances are usually serviced more often.
Can you work with our architect or main contractor in Sandown?
Yes. Many curved doors are part of a larger refurbishment or new build. We can work from the architect's setting-out drawings, agree the structural opening, canopy and floor details with the contractor, and fit the door at the right stage of the programme so finished floors and glazing are protected.
How are payments structured for work in Sandown?
Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.
Do I need permission from a landlord or the council before work in Sandown?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Who is responsible for automatic doors on escape routes in Sandown?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.