Covering Orpington and nearby
From shops and surgeries to schools, care homes and private houses, any building in the BR5 and BR6 postcode districts can be covered for curved automatic doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Frontages in Orpington can be narrow, and many London streets include listed buildings or conservation areas where changes to a shopfront need consent. Slimline operators and folding doors are often the practical options, as is a discreet operator fitted to the existing door.
Nearby towns we also list for curved automatic doors (straight-line distance): Sidcup (3.6 miles), Swanley (3.6 miles), Bromley (4.2 miles), Eltham (5.6 miles), Beckenham (5.8 miles), Welling (6.1 miles).
What to think about for curved automatic doors in Orpington
- Department stores and shopping centres often have landlord fit-out rules for entrances. Ask centre management about approved working hours, hot works and fire alarm connections before the installation date is fixed.
- A full-round door needs a roof or canopy that can be supported and drained. On exposed sites across Greater London, think about how rainwater will leave the canopy without running down the glass into the threshold.
- If the entrance is on an escape route, the fire strategy decides how the door must behave when the alarm sounds or the power fails. Confirm this with your fire risk assessor before the design is fixed.
- The floor must be level across the whole arc, and the matwell and floor finish need cutting to the same radius as the guides. Coordinate the floor layer with the door programme so the curves match.
- Curved doors on landmark buildings in Orpington are often lit at night. Plan canopy lighting, signage and any warm air curtain alongside the door, so cables and fixings are in place before the glass goes in.
Curved automatic doors in Orpington: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £14,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Half-round curved sliding entrance | from £14,995 | installed, ex VAT; priced on survey |
| Full-round curved entrance or large radius | Priced on survey | glass and track are made to the radius |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Curved doors are designed and priced after a free site survey, because the glass, track and screens are made to the radius of your entrance.
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Orpington and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on curved automatic doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Talk to us about curved doors for your hotel, store or civic building in Orpington. The survey is free and there is no obligation to proceed.
Curved automatic doors in Orpington: questions
Is the site survey for a curved door in Orpington free?
Yes. For a new curved entrance, the survey costs nothing and carries no obligation. The engineer measures the frontage, checks the structure, floor and power, and discusses the options with you. You then receive drawings and a fixed, itemised written quote.
How much should I budget for curved automatic doors in Orpington?
Our guide starts from £14,995 excluding VAT (per entrance), the same guide price we use across the UK. The free site survey in Orpington confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you work with our architect or main contractor in Orpington?
Yes. Many curved doors are part of a larger refurbishment or new build. We can work from the architect's setting-out drawings, agree the structural opening, canopy and floor details with the contractor, and fit the door at the right stage of the programme so finished floors and glazing are protected.
How long does a curved door project in Orpington take?
Curved doors are typically 8 to 14 weeks from order once the drawings are approved, because the glass and frame are made to your radius. Installation then usually takes two to four days for a half-round door, and longer for a full-round door with a roof. The quote sets out the expected programme for your building.
What do you need from us for parking and access in Orpington?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
How much disruption should we expect while the work is done in Orpington?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Which building regulations apply to a new automatic entrance in Orpington?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.