Covering Chichester and nearby
If your building is in Chichester, or anywhere in the PO19 postcode district, we can arrange safety and compliance upgrades. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Small offices, community centres and village halls around Chichester tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Bognor Regis (5.8 miles), Emsworth (6.9 miles), Havant (9.1 miles), Littlehampton (10.6 miles), Waterlooville (11.3 miles), Portsmouth (13.8 miles).
What to think about for safety and compliance upgrades in Chichester
- Busy retail and public buildings in Chichester may prefer upgrade work out of hours. Most single-door upgrades are completed in one visit, so disruption is limited.
- Doors serving care homes and hospitals in Chichester may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
- Programme switches within reach of the public in Chichester should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
Safety and compliance upgrades in Chichester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for safety and compliance upgrades and book a survey in Chichester.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Keep an older door in safe use. Arrange a free survey in Chichester and receive a quote that lists every upgrade on its own line.
Safety and compliance upgrades in Chichester: questions
Do you need an inspection before upgrading a door in Chichester?
Not always. If you know what you need, such as a key switch or new signs, we can survey and quote for it directly. For a full picture of the door's risks, a documented safety inspection is the better starting point, and it is a separate service priced before the visit.
Is there a guide price for safety and compliance upgrades in Chichester?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Chichester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you carry out automatic door safety upgrades in Chichester?
Yes. We quote and manage upgrade work in Chichester, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
Is it cheaper to upgrade or replace our old door in Chichester?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
How do you make sure the door works for disabled visitors in Chichester?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Can automatic doors be fitted to a listed building in Chichester?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Chichester?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.