Covering Bedworth and nearby
From shops and surgeries to schools, care homes and private houses, any building in the CV12 postcode district can be covered for safety and compliance upgrades. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Small offices, community centres and village halls around Bedworth tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Nuneaton (3.1 miles), Coventry (5.3 miles), Hinckley (5.7 miles), Kenilworth (10.2 miles), Rugby (11.4 miles), Leamington Spa (13.6 miles).
What to think about for safety and compliance upgrades in Bedworth
- Listed buildings and conservation areas in Bedworth may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Doors serving care homes and hospitals in Bedworth may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
- If your building in Bedworth has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
- Programme switches within reach of the public in Bedworth should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
Safety and compliance upgrades in Bedworth: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Bedworth.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Talk to us about upgrading the automatic doors at your site in Bedworth. The work can be phased by priority to suit your budget.
Safety and compliance upgrades in Bedworth: questions
Our door in Bedworth has no battery backup. Do we need one?
It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.
What do you charge for safety and compliance upgrades in Bedworth?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Bedworth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you document the upgrades on our door in Bedworth?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
Do you carry out automatic door safety upgrades in Bedworth?
Yes. We quote and manage upgrade work in Bedworth, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
How much disruption should we expect while the work is done in Bedworth?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Can installation in Bedworth happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Who is responsible for automatic doors on escape routes in Bedworth?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.