Covering Telford and nearby
From shops and surgeries to schools, care homes and private houses, any building in the TF2, TF3, TF4, TF5, TF7 and TF8 postcode districts can be covered for safety and compliance upgrades. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Universities, colleges and city hotels see sharp peaks of traffic at changeover times and check-in hours. For entrances like these in Telford, opening width, hold-open time and sensor range are set so the door copes with crowds without wasting heat.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Wellington (3.3 miles), Shrewsbury (12.9 miles), Wolverhampton (15.1 miles), Wednesfield (16.2 miles), Stafford (16.5 miles), Sedgley (16.6 miles).
What to think about for safety and compliance upgrades in Telford
- If your building in Telford has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
- Listed buildings and conservation areas in Telford may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
- Doors serving care homes and hospitals in Telford may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
- After upgrades, keep the record with your inspection report. Matching each change to its finding shows the actions have been closed off, which insurers often ask to see.
Safety and compliance upgrades in Telford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Telford and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on safety and compliance upgrades separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free upgrade survey in Telford and find out which changes will make your older automatic door safer for the people using it.
Safety and compliance upgrades in Telford: questions
Will you document the upgrades on our door in Telford?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
What will safety and compliance upgrades in Telford cost?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Telford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is it cheaper to upgrade or replace our old door in Telford?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
Can you quote from our existing inspection report in Telford?
Yes. Send us the report and we will price each recommended action. If the door has changed since the report was written, or a finding is unclear, the engineer checks it on the free survey before the quote is finalised, so you only pay for what the door needs.
What happens to the old door when a new one is fitted in Telford?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Can installation in Telford happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Do businesses in Telford have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.