Covering Banbury and nearby
Engineers working under our management travel to addresses across the OX16 postcode district for safety and compliance upgrades. There is no depot or showroom in Banbury; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Parking on a busy high street can be tight. When work is booked in Banbury, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Bicester (13.8 miles), Daventry (15.4 miles), Leamington Spa (17.1 miles), Stratford-upon-Avon (17.9 miles), Warwick (18.3 miles), Witney (20.3 miles).
What to think about for safety and compliance upgrades in Banbury
- Older shopfronts in Banbury often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Busy retail and public buildings in Banbury may prefer upgrade work out of hours. Most single-door upgrades are completed in one visit, so disruption is limited.
- Doors serving care homes and hospitals in Banbury may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
- Listed buildings and conservation areas in Banbury may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
Safety and compliance upgrades in Banbury: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is safety and compliance upgrades for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Banbury.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Talk to us about upgrading the automatic doors at your site in Banbury. The work can be phased by priority to suit your budget.
Safety and compliance upgrades in Banbury: questions
Can you quote from our existing inspection report in Banbury?
Yes. Send us the report and we will price each recommended action. If the door has changed since the report was written, or a finding is unclear, the engineer checks it on the free survey before the quote is finalised, so you only pay for what the door needs.
Is there a guide price for safety and compliance upgrades in Banbury?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Banbury confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you document the upgrades on our door in Banbury?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
Do you carry out automatic door safety upgrades in Banbury?
Yes. We quote and manage upgrade work in Banbury, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
What happens to the old door when a new one is fitted in Banbury?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What happens once the installation in Banbury is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Banbury?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.