Covering Corby and nearby
We do not keep premises in Corby. Instead, enquiries about safety and compliance upgrades come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the NN17 and NN18 postcode districts on a date that suits the site.
Schools and colleges in and around Corby often want work done in the holidays, when entrances can be taken out of use without disrupting pupils. Planning ahead for half-term or summer dates makes it easier to find a slot that suits the timetable.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Uppingham (6.5 miles), Kettering (6.9 miles), Market Harborough (9.8 miles), Ketton (10.7 miles), Oakham (11.9 miles), Wellingborough (13.4 miles).
What to think about for safety and compliance upgrades in Corby
- After upgrades, keep the record with your inspection report. Matching each change to its finding shows the actions have been closed off, which insurers often ask to see.
- Programme switches within reach of the public in Corby should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- Listed buildings and conservation areas in Corby may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Doors serving care homes and hospitals in Corby may need wider safety zones and gentler closing speeds for residents and patients who move slowly or need help.
Safety and compliance upgrades in Corby: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Corby and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on safety and compliance upgrades separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Close off the actions on your automatic door risk assessment in Corby. Ask for a fixed, itemised quote for the upgrades it recommends.
Safety and compliance upgrades in Corby: questions
Can you quote from our existing inspection report in Corby?
Yes. Send us the report and we will price each recommended action. If the door has changed since the report was written, or a finding is unclear, the engineer checks it on the free survey before the quote is finalised, so you only pay for what the door needs.
How are prices worked out for safety and compliance upgrades in Corby?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Corby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is it cheaper to upgrade or replace our old door in Corby?
Upgrading is usually cheaper when the door and operator are sound. If the operator is old and several upgrades are needed, a new drive unit with new sensors may be better value overall. The survey compares the options, and the quote can show both so you can decide.
Do you need an inspection before upgrading a door in Corby?
Not always. If you know what you need, such as a key switch or new signs, we can survey and quote for it directly. For a full picture of the door's risks, a documented safety inspection is the better starting point, and it is a separate service priced before the visit.
What should I send before the survey in Corby?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for safety and compliance upgrades together more easily.
Do you service doors in Corby after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Who is responsible for automatic doors on escape routes in Corby?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.