Covering Preston and nearby
Addresses anywhere in the PR1 and PR2 postcode districts can book safety and compliance upgrades through us. The engineer who attends works under our management and travels to the site. There is no branch in Preston, so the price, the booking and the paperwork all come from one place.
Access in a city centre needs planning. Loading bays, permit parking, pedestrianised streets and delivery windows all affect when an engineer can unload, so a visit to Preston is booked around them and any restrictions are noted in advance.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Bamber Bridge (2.8 miles), Leyland (4.5 miles), Chorley (8.6 miles), Blackburn (9.1 miles), Darwen (10.8 miles), Lytham St Annes (12.0 miles).
What to think about for safety and compliance upgrades in Preston
- Schools and nurseries need particular attention to finger traps at hinges and beside screens, where small children's hands could easily be caught as the door moves.
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
- Older shopfronts in Preston often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
Safety and compliance upgrades in Preston: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for safety and compliance upgrades in Preston, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Book a free upgrade survey in Preston and find out which changes will make your older automatic door safer for the people using it.
Safety and compliance upgrades in Preston: questions
Do you carry out automatic door safety upgrades in Preston?
Yes. We quote and manage upgrade work in Preston, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
Is there a guide price for safety and compliance upgrades in Preston?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Preston confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you need an inspection before upgrading a door in Preston?
Not always. If you know what you need, such as a key switch or new signs, we can survey and quote for it directly. For a full picture of the door's risks, a documented safety inspection is the better starting point, and it is a separate service priced before the visit.
Can upgrades in Preston be phased over time?
Yes. Each item is priced separately, so you can start with the high-priority findings and plan the rest for later, often at the next service visit. Your quote shows which items are urgent and which can sensibly wait, so you can budget for each phase.
What should I send before the survey in Preston?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for safety and compliance upgrades together more easily.
What happens once the installation in Preston is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in Preston?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.