Covering Hereford and nearby
We do not keep premises in Hereford. Instead, enquiries about safety and compliance upgrades come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the HR1 postcode district on a date that suits the site.
Town-centre buildings in Hereford range from modern units to older shopfronts. Older frontages can have uneven floors, limited head height and timber frames that need checking before an operator is fitted or adjusted, and the engineer looks at these on site.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Ross-on-Wye (11.6 miles), Leominster (11.7 miles), Monmouth (16.9 miles), Malvern (17.0 miles), Abergavenny (20.8 miles), Worcester (22.9 miles).
What to think about for safety and compliance upgrades in Hereford
- Glass doors need visible markings. Faded manifestation is one of the cheapest findings to fix, and it helps people with visual impairments see the door.
- Older shopfronts in Hereford often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Programme switches within reach of the public in Hereford should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
- Shared entrances in office blocks need agreement on who pays for upgrades. The inspection report helps landlords and tenants agree the scope before work is ordered.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
Safety and compliance upgrades in Hereford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Describe what you need. Whether the job is safety and compliance upgrades for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Hereford.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Close off the actions on your automatic door risk assessment in Hereford. Ask for a fixed, itemised quote for the upgrades it recommends.
Safety and compliance upgrades in Hereford: questions
Our door in Hereford has no battery backup. Do we need one?
It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.
What do you charge for safety and compliance upgrades in Hereford?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Hereford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you document the upgrades on our door in Hereford?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
Do you carry out automatic door safety upgrades in Hereford?
Yes. We quote and manage upgrade work in Hereford, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
What should I send before the survey in Hereford?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for safety and compliance upgrades together more easily.
What is the lead time for safety and compliance upgrades in Hereford?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Do businesses in Hereford have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.