Covering Romsey and nearby
Our coverage of Romsey takes in the SO51 postcode district and the neighbouring parts of Hampshire. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about safety and compliance upgrades and we will confirm the arrangements and the price in writing.
GP surgeries, dental practices and pharmacies in Romsey often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Chandler's Ford (4.4 miles), Totton (4.9 miles), Eastleigh (6.7 miles), Southampton (7.2 miles), Winchester (9.5 miles), Hythe (9.9 miles).
What to think about for safety and compliance upgrades in Romsey
- Schools and nurseries need particular attention to finger traps at hinges and beside screens, where small children's hands could easily be caught as the door moves.
- If your building in Romsey has one main entrance, battery backup lets the door open safely in a power cut, so there is always a way in and out.
- Programme switches within reach of the public in Romsey should be key-operated or protected, so the door cannot be left in an unsafe mode by mistake.
- Glass doors need visible markings. Faded manifestation is one of the cheapest findings to fix, and it helps people with visual impairments see the door.
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
Safety and compliance upgrades in Romsey: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for safety and compliance upgrades and book a survey in Romsey.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us your inspection report for doors in Romsey, and we will arrange a free survey and quote each upgrade as a separate item.
Safety and compliance upgrades in Romsey: questions
Do you carry out automatic door safety upgrades in Romsey?
Yes. We quote and manage upgrade work in Romsey, and the fitting is done by specialist automatic door engineers on our behalf. The survey is free, and each upgrade is priced separately on a fixed, itemised quote. After the work you receive a record of each change and its test results.
What will safety and compliance upgrades in Romsey cost?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Romsey confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will you document the upgrades on our door in Romsey?
Yes. You receive a record of what was fitted, the settings and the test results, linked to each finding in the inspection report. Keep it with your service records for insurers, landlords or anyone else who asks how the door's risks have been dealt with.
Our door in Romsey has no battery backup. Do we need one?
It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.
Is there a warranty on safety and compliance upgrades?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
What do you need from us for parking and access in Romsey?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Who is responsible for automatic doors on escape routes in Romsey?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.