Covering Hayes and nearby
We do not keep premises in Hayes. Instead, enquiries about safety and compliance upgrades come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the UB3 and UB4 postcode districts on a date that suits the site.
Security matters on busy London streets, so entrances in Hayes often need doors that lock firmly at night and work with alarms, shutters or access control. The operator, the locking and any shutter are planned together so they work in the right order.
Nearby towns we also list for safety and compliance upgrades (straight-line distance): Southall (2.3 miles), Greenford (3.1 miles), Uxbridge (3.4 miles), Ruislip (4.0 miles), Hounslow (4.2 miles), Feltham (4.8 miles).
What to think about for safety and compliance upgrades in Hayes
- Very old controllers may not support modern monitored sensors. In that case a new drive unit with sensors can cost less than several separate upgrades.
- Listed buildings and conservation areas in Hayes may limit visible changes. Slim sensors and discreet guards keep the look of the historic entrance largely unchanged.
- Escape route doors must open, break out or be openable by hand as the fire strategy requires. Check what yours says before choosing which upgrades to make.
- Older shopfronts in Hayes often have narrow side screens with large gaps beside the sliding leaves. Light curtains or guard screens can protect them without changing the frame.
- Busy retail and public buildings in Hayes may prefer upgrade work out of hours. Most single-door upgrades are completed in one visit, so disruption is limited.
Safety and compliance upgrades in Hayes: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £195 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Add or replace a safety or activation sensor | £195 – £495 | per sensor fitted, ex VAT |
| Side-screen protection or guarding | from £295 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Programme switch with key | £145 – £345 | fitted, ex VAT |
| Upgrade package for an older door | £795 – £2,495 | typical, after an inspection, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for safety and compliance upgrades and book a survey in Hayes.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Need battery backup, safety sensors or side-screen guarding in Hayes? Get in touch for a survey at no cost and a fixed price.
Safety and compliance upgrades in Hayes: questions
How long do upgrades take at premises in Hayes?
Most single-door upgrades take one visit of a few hours. Parts such as light curtains and battery units are typically 1 to 3 weeks to arrive after the quote is accepted. Larger packages are planned with you so the entrance stays usable wherever possible.
Is there a guide price for safety and compliance upgrades in Hayes?
Our guide starts from £195 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Hayes confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can upgrades in Hayes be phased over time?
Yes. Each item is priced separately, so you can start with the high-priority findings and plan the rest for later, often at the next service visit. Your quote shows which items are urgent and which can sensibly wait, so you can budget for each phase.
Our door in Hayes has no battery backup. Do we need one?
It depends on whether the door is on an escape route and what the fire strategy for the building requires. Doors on escape routes usually need to open, break out or be openable by hand if the power fails. The person responsible for fire safety in the building should confirm the requirement.
What should I send before the survey in Hayes?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for safety and compliance upgrades together more easily.
What happens once the installation in Hayes is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Hayes?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.