Covering Shirley and nearby
Addresses anywhere in the B90 postcode district can book break-out escape route doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Shirley, so the price, the booking and the paperwork all come from one place.
Care homes in and around Shirley often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.
Nearby towns we also list for break-out escape route doors (straight-line distance): Solihull (1.6 miles), Birmingham (5.9 miles), Smethwick (8.4 miles), Redditch (9.0 miles), Halesowen (10.0 miles), Oldbury (10.3 miles).
What to think about for break-out escape route doors in Shirley
- Shopping centre units in Shirley usually need landlord approval for a new entrance and for any fire alarm connection. Ask centre management for their fit-out rules early, as they often set working hours and contractor requirements.
- Work on a busy entrance in Shirley is often best done early in the morning, in the evening or over a weekend. Any out-of-hours working is agreed and priced in the written quote rather than added later.
- Hospitals and clinics in Shirley often want break-out entrances tied into the building management and fire alarm systems. Allow time for the alarm contractor to provide a signal and for the estates team to approve the interface.
- Check the swing zone outside the entrance. Planters, cycle stands, bins and A-boards that are harmless beside a normal door can stop a break-out leaf opening fully, so plan to keep that area clear.
- Older entrances on high streets in Shirley may have uneven thresholds or sloping pavements. Break-out leaves need a level floor and solid fixing for the bottom pivots, and correcting that can add a day to the work.
Break-out escape route doors in Shirley: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in England
In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Shirley.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Tell us about the building in Shirley, its footfall and its fire alarm, and we will plan a break-out door around them, starting with a free site visit.
Break-out escape route doors in Shirley: questions
Can you work with our fire risk assessor in Shirley?
Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.
What price range should I expect for break-out escape route doors in Shirley?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Shirley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you install break-out sliding doors in Shirley?
Yes. We arrange surveys and installations in Shirley through specialist automatic door engineers working under our management. We supply the complete entrance, set it up to the fire strategy you give us, test it in every mode and hand over the records. The survey is free and the quote is fixed.
Can you look after break-out doors in Shirley once they are fitted?
Yes. We can arrange planned servicing, with the break-out fittings, alarm release and power failure behaviour tested at each visit and a written record left on site. Each visit is priced in writing before anyone attends, and the interval is set by how hard the door works.
What does the written quote for break-out escape route doors in Shirley include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Do you service doors in Shirley after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Which building regulations apply to a new automatic entrance in Shirley?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.