Covering Lichfield and nearby
From shops and surgeries to schools, care homes and private houses, any building in the WS13 and WS14 postcode districts can be covered for break-out escape route doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Doors at quieter sites in Lichfield and elsewhere in Staffordshire can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for break-out escape route doors (straight-line distance): Burntwood (4.3 miles), Tamworth (6.3 miles), Aldridge (6.5 miles), Rugeley (7.1 miles), Sutton Coldfield (7.9 miles), Cannock (8.6 miles).
What to think about for break-out escape route doors in Lichfield
- If a canopy, ramp or steps sit close to the door, measure how far a broken-out leaf will travel. A leaf that clips a handrail or step edge will not give the escape width the strategy assumes.
- Listed buildings and conservation areas in Lichfield may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
- Hospitals and clinics in Lichfield often want break-out entrances tied into the building management and fire alarm systems. Allow time for the alarm contractor to provide a signal and for the estates team to approve the interface.
- Get hold of the fire strategy, or ask your fire risk assessor, before the survey. Knowing whether the door must slide open on alarm, break out, or both, saves a second visit and a revised quote.
- Work on a busy entrance in Lichfield is often best done early in the morning, in the evening or over a weekend. Any out-of-hours working is agreed and priced in the written quote rather than added later.
Break-out escape route doors in Lichfield: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for break-out escape route doors and book a survey in Lichfield.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Ask for a free survey of your escape route entrance in Lichfield. You will get a fixed quote, and nothing is ordered until you accept it.
Break-out escape route doors in Lichfield: questions
We have an old sliding door in Lichfield. Do we have to replace all of it?
Not always. If the frame and operator can take break-out leaves and parts are still available, a conversion may be possible. If the door is older or its parts are unsupported, replacing the whole entrance is usually more reliable. The survey looks at both and the quote explains the difference.
How are prices worked out for break-out escape route doors in Lichfield?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Lichfield confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is a break-out door suitable for an exposed entrance in Lichfield?
Usually, yes. Wind pressure on the leaves is one of the things the survey checks, along with which way the entrance faces and how sheltered it is. The break-out fittings and operator settings are chosen so the leaves hold in line in normal weather but still open by hand in an emergency.
Can you work with our fire risk assessor in Lichfield?
Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.
What is the lead time for break-out escape route doors in Lichfield?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
How much disruption should we expect while the work is done in Lichfield?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Who is responsible for automatic doors on escape routes in Lichfield?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.