Covering York and nearby
We cover the whole of the YO1, YO10, YO24, YO30 and YO31 postcode districts, along with nearby towns in North Yorkshire. You book each visit for break-out escape route doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Large office buildings in York often pair automatic doors with access control, turnstiles and visitor systems. Linking the operator to card readers, intercoms or timers means the entrance opens for staff and visitors at the right times and stays secure out of hours.
Nearby towns we also list for break-out escape route doors (straight-line distance): Selby (12.1 miles), Harrogate (18.6 miles), Goole (19.5 miles), Castleford (19.7 miles), Pontefract (20.7 miles), Rothwell (21.7 miles).
What to think about for break-out escape route doors in York
- Get hold of the fire strategy, or ask your fire risk assessor, before the survey. Knowing whether the door must slide open on alarm, break out, or both, saves a second visit and a revised quote.
- Older entrances on high streets in York may have uneven thresholds or sloping pavements. Break-out leaves need a level floor and solid fixing for the bottom pivots, and correcting that can add a day to the work.
- Entrances facing the prevailing wind can have break-out leaves pushed by strong gusts. The break-out fittings and the door's wind settings are chosen at survey to suit how exposed the entrance is.
- Work on a busy entrance in York is often best done early in the morning, in the evening or over a weekend. Any out-of-hours working is agreed and priced in the written quote rather than added later.
- A break-out door needs a dedicated fused spur and, where the strategy relies on it opening without mains power, a battery unit. If there is no supply near the head of the door, an electrician will need to run one.
Break-out escape route doors in York: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for break-out escape route doors and book a survey in York.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Get a fixed price for a break-out sliding entrance in York. Use the quote form or call us, and we will arrange a survey at a time that suits the building.
Break-out escape route doors in York: questions
Can you work with our fire risk assessor in York?
Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.
How are prices worked out for break-out escape route doors in York?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in York confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is a break-out door suitable for an exposed entrance in York?
Usually, yes. Wind pressure on the leaves is one of the things the survey checks, along with which way the entrance faces and how sheltered it is. The break-out fittings and operator settings are chosen so the leaves hold in line in normal weather but still open by hand in an emergency.
Do you install break-out sliding doors in York?
Yes. We arrange surveys and installations in York through specialist automatic door engineers working under our management. We supply the complete entrance, set it up to the fire strategy you give us, test it in every mode and hand over the records. The survey is free and the quote is fixed.
What should I send before the survey in York?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for break-out escape route doors together more easily.
Can automatic doors be fitted to a listed building in York?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Which building regulations apply to a new automatic entrance in York?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.