Covering Hammersmith and nearby
We do not keep premises in Hammersmith. Instead, enquiries about break-out escape route doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the W6 and W14 postcode districts on a date that suits the site.
Office entrances in Hammersmith commonly combine automatic doors with turnstiles, concierge desks and card access. When the operator is wired into those systems, staff pass through quickly, visitors are let in from reception and the building locks down outside working hours.
Nearby towns we also list for break-out escape route doors (straight-line distance): Shepherd's Bush (0.8 miles), Chiswick (1.3 miles), Fulham (1.6 miles), Kensington (1.7 miles), Acton (2.3 miles), Putney (2.3 miles).
What to think about for break-out escape route doors in Hammersmith
- Listed buildings and conservation areas in Hammersmith may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
- Entrances facing the prevailing wind can have break-out leaves pushed by strong gusts. The break-out fittings and the door's wind settings are chosen at survey to suit how exposed the entrance is.
- If a canopy, ramp or steps sit close to the door, measure how far a broken-out leaf will travel. A leaf that clips a handrail or step edge will not give the escape width the strategy assumes.
- Work on a busy entrance in Hammersmith is often best done early in the morning, in the evening or over a weekend. Any out-of-hours working is agreed and priced in the written quote rather than added later.
- Think about night security alongside escape. A lock that stops a leaf breaking out while people are still inside causes problems, so choose one that releases on the fire alarm where the strategy calls for it.
Break-out escape route doors in Hammersmith: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in England
In England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for break-out escape route doors in Hammersmith, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Ask for a free survey of your escape route entrance in Hammersmith. You will get a fixed quote, and nothing is ordered until you accept it.
Break-out escape route doors in Hammersmith: questions
Can you work with our fire risk assessor in Hammersmith?
Yes, and it usually helps. We can send your assessor the proposed specification, the break-out arrangement and how the door will behave on power loss and alarm, so they can confirm it matches the fire strategy before you order. Any changes they ask for are reflected in a revised quote.
What is the guide price for break-out escape route doors in Hammersmith?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Hammersmith confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
How long will our entrance in Hammersmith be out of use?
Usually one to three days on site, depending on the size of the opening and any building or electrical work. Where the entrance is the only way in, we plan the sequence so a temporary door or a partly open entrance can be kept, and agree any out-of-hours working in the quote.
Will a break-out door in Hammersmith need building regulations approval?
It can. Replacing an entrance, especially one on an escape route, may count as building work that needs approval, and the rules differ in each UK nation. We tell you at survey when approval or landlord consent looks likely, so it can be arranged before the door is ordered.
What happens once the installation in Hammersmith is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
How do you make sure the door works for disabled visitors in Hammersmith?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Which building regulations apply to a new automatic entrance in Hammersmith?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.