Coverage across the Edinburgh area
Coverage for break-out escape route doors extends across all of the Edinburgh area, including addresses some distance from the towns listed below. We are the contracting party, the engineers work under our management, and the price is agreed in writing first. If your town is not among the 3 we list, contact us anyway; the process and guide prices do not change.
Towns listed in the Edinburgh area: Edinburgh, South Queensferry, Currie.
What to think about for break-out escape route doors in the Edinburgh area
- A break-out door needs a dedicated fused spur and, where the strategy relies on it opening without mains power, a battery unit. If there is no supply near the head of the door, an electrician will need to run one.
- Listed buildings and conservation areas in the Edinburgh area may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
- Check the swing zone outside the entrance. Planters, cycle stands, bins and A-boards that are harmless beside a normal door can stop a break-out leaf opening fully, so plan to keep that area clear.
- Supermarkets and large stores in the Edinburgh area see trolleys, pallets and cleaning machines through the entrance. Those knocks can stiffen or loosen break-out fittings, so set service intervals with that traffic in mind.
- Think about night security alongside escape. A lock that stops a leaf breaking out while people are still inside causes problems, so choose one that releases on the fire alarm where the strategy calls for it.
Break-out escape route doors in the Edinburgh area: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in Scotland
In Scotland, fire safety regulations say sliding or revolving doors must not be used for exits specifically intended as emergency exits, and Scottish guidance allows automatic and revolving doors on an escape route only where they fail safely to outward opening, or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm. Whether a break-out door is suitable is decided by the fire strategy for the building and the person responsible for fire safety under the Fire (Scotland) Act 2005.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in the Edinburgh area.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Tell us about the building in the Edinburgh area, its footfall and its fire alarm, and we will plan a break-out door around them, starting with a free site visit.
Break-out escape route doors in the Edinburgh area: questions
Can you look after break-out doors in the Edinburgh area once they are fitted?
Yes. We can arrange planned servicing, with the break-out fittings, alarm release and power failure behaviour tested at each visit and a written record left on site. Each visit is priced in writing before anyone attends, and the interval is set by how hard the door works.
Can you give me a price for break-out escape route doors in the Edinburgh area?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in the Edinburgh area confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you install break-out sliding doors in the Edinburgh area?
Yes. We arrange surveys and installations in the Edinburgh area through specialist automatic door engineers working under our management. We supply the complete entrance, set it up to the fire strategy you give us, test it in every mode and hand over the records. The survey is free and the quote is fixed.
Our shop in the Edinburgh area is inside a shopping centre. Can you still fit a break-out door?
In most cases, yes. Centre management usually sets rules on contractors, working hours and connections to the centre's fire alarm. We work within those rules, provide the method statements and insurance details they ask for, and plan the fitting so the unit can trade for as much of the time as possible.
How much disruption should we expect while the work is done in the Edinburgh area?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Can automatic doors be fitted to a listed building in the Edinburgh area?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Is a building warrant needed for a new automatic entrance in the Edinburgh area?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.