UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Break-out escape route doors · Dyfed

Break-out escape route doors in Haverfordwest

Whether you manage a retail unit, a hospital wing or a council building in Haverfordwest, the first question about a break-out door is what the fire strategy asks for. We work from that strategy, then design, supply and fit an entrance to match it.

Town
Haverfordwest
Area
Dyfed
Postcodes
SA61
Guide price
From £7,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Haverfordwest and nearby

Engineers working under our management travel to addresses across the SA61 postcode district for break-out escape route doors. There is no depot or showroom in Haverfordwest; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Libraries, health centres and council buildings in Haverfordwest still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.

Nearby towns we also list for break-out escape route doors (straight-line distance): Milford Haven (6.7 miles), Pembroke Dock (7.7 miles), Carmarthen (28.6 miles).

What to think about for break-out escape route doors in Haverfordwest

  • A break-out door needs a dedicated fused spur and, where the strategy relies on it opening without mains power, a battery unit. If there is no supply near the head of the door, an electrician will need to run one.
  • Get hold of the fire strategy, or ask your fire risk assessor, before the survey. Knowing whether the door must slide open on alarm, break out, or both, saves a second visit and a revised quote.
  • Listed buildings and conservation areas in Haverfordwest may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
  • Entrances facing the prevailing wind can have break-out leaves pushed by strong gusts. The break-out fittings and the door's wind settings are chosen at survey to suit how exposed the entrance is.
  • Think about night security alongside escape. A lock that stops a leaf breaking out while people are still inside causes problems, so choose one that releases on the fire alarm where the strategy calls for it.

Break-out escape route doors in Haverfordwest: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.

ItemGuide priceNotes
Break-out sliding door set for an escape routefrom £7,995installed, ex VAT; typically up to £16,995
Converting an existing sliding door to break-outPriced on surveydepends on the frame, leaves and operator
Battery backup for power-cut operation£395 – £695per door, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT

Standards and rules in Wales

In Wales, as in England, fire safety law says sliding or revolving doors must not be used for exits specifically intended as emergency exits. Break-out sliding doors are used where an entrance also forms part of an escape route, as the fire strategy allows. Whether a break-out door is suitable is decided by the fire strategy for the building and the responsible person under the Regulatory Reform (Fire Safety) Order 2005.

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Haverfordwest.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Ask for a free survey of your escape route entrance in Haverfordwest. You will get a fixed quote, and nothing is ordered until you accept it.

Break-out escape route doors in Haverfordwest: questions

We have an old sliding door in Haverfordwest. Do we have to replace all of it?

Not always. If the frame and operator can take break-out leaves and parts are still available, a conversion may be possible. If the door is older or its parts are unsupported, replacing the whole entrance is usually more reliable. The survey looks at both and the quote explains the difference.

How much should I budget for break-out escape route doors in Haverfordwest?

Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Haverfordwest confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Our shop in Haverfordwest is inside a shopping centre. Can you still fit a break-out door?

In most cases, yes. Centre management usually sets rules on contractors, working hours and connections to the centre's fire alarm. We work within those rules, provide the method statements and insurance details they ask for, and plan the fitting so the unit can trade for as much of the time as possible.

How long will our entrance in Haverfordwest be out of use?

Usually one to three days on site, depending on the size of the opening and any building or electrical work. Where the entrance is the only way in, we plan the sequence so a temporary door or a partly open entrance can be kept, and agree any out-of-hours working in the quote.

Do you service doors in Haverfordwest after installing them?

Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.

How do you make sure the door works for disabled visitors in Haverfordwest?

We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.

Are the rules for automatic doors different in Wales?

Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.

Next step

Break-out escape route doors in Haverfordwest

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.