Covering Coleraine and nearby
We cover the whole of the BT52 postcode district, along with nearby towns in County Londonderry. You book each visit for break-out escape route doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
In Coleraine, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for break-out escape route doors (straight-line distance): Ballymoney (7.5 miles), Limavady (12.6 miles), Ballymena (24.2 miles), Magherafelt (26.3 miles), Derry/Londonderry (27.1 miles).
What to think about for break-out escape route doors in Coleraine
- If a canopy, ramp or steps sit close to the door, measure how far a broken-out leaf will travel. A leaf that clips a handrail or step edge will not give the escape width the strategy assumes.
- Listed buildings and conservation areas in Coleraine may need consent before a new entrance goes in. Slim frames and the existing opening can often be kept, but check with the planning authority before ordering.
- Shopping centre units in Coleraine usually need landlord approval for a new entrance and for any fire alarm connection. Ask centre management for their fit-out rules early, as they often set working hours and contractor requirements.
- Get hold of the fire strategy, or ask your fire risk assessor, before the survey. Knowing whether the door must slide open on alarm, break out, or both, saves a second visit and a revised quote.
- Think about night security alongside escape. A lock that stops a leaf breaking out while people are still inside causes problems, so choose one that releases on the fire alarm where the strategy calls for it.
Break-out escape route doors in Coleraine: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £7,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Break-out sliding door set for an escape route | from £7,995 | installed, ex VAT; typically up to £16,995 |
| Converting an existing sliding door to break-out | Priced on survey | depends on the frame, leaves and operator |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
Standards and rules in Northern Ireland
The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access to buildings is in Technical Booklet R, and building control approval is needed for new entrances.
In Northern Ireland, the Fire Safety Regulations (Northern Ireland) 2010 say sliding or revolving doors shall not be used for exits specifically intended as emergency exits, and automatic doors on an escape route need arrangements that never block people leaving, such as failing safely to open or a break-out facility, agreed through the fire risk assessment. Whether a break-out door is suitable is decided by the fire strategy for the building and the person with fire safety duties under the Fire and Rescue Services (Northern Ireland) Order 2006.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Coleraine and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on break-out escape route doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Send us the opening size and what your fire strategy asks for, and we will arrange a free survey in Coleraine and a fixed, itemised quote for a break-out entrance.
Break-out escape route doors in Coleraine: questions
Will a break-out door in Coleraine need building regulations approval?
It can. Replacing an entrance, especially one on an escape route, may count as building work that needs approval, and the rules differ in each UK nation. We tell you at survey when approval or landlord consent looks likely, so it can be arranged before the door is ordered.
What do you charge for break-out escape route doors in Coleraine?
Our guide starts from £7,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Coleraine confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Our shop in Coleraine is inside a shopping centre. Can you still fit a break-out door?
In most cases, yes. Centre management usually sets rules on contractors, working hours and connections to the centre's fire alarm. We work within those rules, provide the method statements and insurance details they ask for, and plan the fitting so the unit can trade for as much of the time as possible.
Can you look after break-out doors in Coleraine once they are fitted?
Yes. We can arrange planned servicing, with the break-out fittings, alarm release and power failure behaviour tested at each visit and a written record left on site. Each visit is priced in writing before anyone attends, and the interval is set by how hard the door works.
What do you need from us for parking and access in Coleraine?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
What happens once the installation in Coleraine is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which marking should a new automatic door in Coleraine carry?
In Northern Ireland machinery carries the CE marking, with UKNI added where a UK body carried out the conformity assessment. The EU Machinery Regulation applies in Northern Ireland from 20 January 2027.