Covering Chichester and nearby
Homes, businesses and public buildings throughout the PO19 postcode district can arrange automatic swing doors with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Chichester for the job rather than working from premises in town.
Small offices, community centres and village halls around Chichester tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for automatic swing doors (straight-line distance): Bognor Regis (5.8 miles), Emsworth (6.9 miles), Havant (9.1 miles), Littlehampton (10.6 miles), Waterlooville (11.3 miles), Portsmouth (13.8 miles).
What to think about for automatic swing doors in Chichester
- Office buildings in Chichester with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
- External swing doors facing the wind need stronger operators and careful set-up. On exposed sites across West Sussex, consider whether a canopy or a sliding door would work better.
- Double doors with rebated meeting edges need operators that open and close in sequence. The engineer sets this up so the leaves never clash or leave a gap when closed.
- Power comes from a fused spur near the head of the door. In older buildings in Chichester with solid walls, allow time for surface trunking or chasing to reach the operator.
Automatic swing doors in Chichester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic swing doors in Chichester, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Ready to automate a busy door in Chichester? There is no charge for the survey and no obligation once you have the quote.
Automatic swing doors in Chichester: questions
Is the survey for swing doors in Chichester free?
Yes, for new operators and doorsets the survey is free and carries no obligation. The engineer looks at each door, its hinges, frame, locks, power and fire labels, and you receive a fixed, itemised written quote for the work. Each door is priced separately, so the work can be phased if needed.
How are prices worked out for automatic swing doors in Chichester?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Chichester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What paperwork do we get for automated doors in Chichester?
You receive the test record, a site-specific risk assessment, user instructions and the conformity paperwork for each door. When an existing manual door is motorised, whoever does it may take on the manufacturer's duties for the finished door, so the Declaration of Conformity and instructions are handed over at the end of the job.
Can our existing doors in Chichester be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
Do you service doors in Chichester after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What happens once the installation in Chichester is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Chichester?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.