Covering Port Talbot and nearby
We cover the whole of the SA12 and SA13 postcode districts, along with nearby towns in West Glamorgan. You book each visit for automatic swing doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
In Port Talbot, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for automatic swing doors (straight-line distance): Neath (5.0 miles), Maesteg (5.4 miles), Swansea (7.3 miles), Porthcawl (8.5 miles), Bridgend (10.6 miles), Gorseinon (12.4 miles).
What to think about for automatic swing doors in Port Talbot
- Double doors with rebated meeting edges need operators that open and close in sequence. The engineer sets this up so the leaves never clash or leave a gap when closed.
- Check the hinges first. Older doors in Port Talbot often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Hospital and care home corridors in Port Talbot need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
- Schools in Port Talbot often prefer installation during half-term or the summer holidays. Operators are typically 2 to 4 weeks from order, so book the survey a few weeks before the break.
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
Automatic swing doors in Port Talbot: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Port Talbot and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic swing doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ready to automate a busy door in Port Talbot? There is no charge for the survey and no obligation once you have the quote.
Automatic swing doors in Port Talbot: questions
How quickly can a swing operator be fitted in Port Talbot?
Operators for existing doors are typically 2 to 4 weeks from order. On site, a single door usually takes half a day to a day, and a pair about a day. We can plan work for evenings, weekends or holidays where the building is busy, with any extra cost shown in the quote.
What will automatic swing doors in Port Talbot cost?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Port Talbot confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will the swing operator in Port Talbot work with our fire alarm?
It can. Fire doors that are held open must close automatically when the fire alarm operates, and the operator can be linked to the alarm to do this. Other doors can be set to open on alarm where the fire strategy needs it. Your alarm engineer usually makes the panel connection.
Do you fit low-energy operators in Port Talbot as well?
Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.
What happens once the installation in Port Talbot is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do I need permission from a landlord or the council before work in Port Talbot?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Who is responsible for automatic doors on escape routes in Port Talbot?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.