Covering Retford and nearby
Engineers working under our management travel to addresses across the DN22 postcode district for automatic swing doors. There is no depot or showroom in Retford; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Doors at quieter sites in Retford and elsewhere in Nottinghamshire can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for automatic swing doors (straight-line distance): Worksop (7.6 miles), Gainsborough (8.4 miles), Maltby (12.4 miles), Mansfield Woodhouse (15.0 miles), Doncaster (15.9 miles), Mansfield (16.8 miles).
What to think about for automatic swing doors in Retford
- Doors on escape routes in Retford usually open in the direction of escape. If the current door opens the other way, the survey will flag whether it should be changed before the operator is fitted.
- External swing doors facing the wind need stronger operators and careful set-up. On exposed sites across Nottinghamshire, consider whether a canopy or a sliding door would work better.
- Check the hinges first. Older doors in Retford often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Schools in Retford often prefer installation during half-term or the summer holidays. Operators are typically 2 to 4 weeks from order, so book the survey a few weeks before the break.
- Office buildings in Retford with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
Automatic swing doors in Retford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic swing doors in Retford, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Tell us how many doors you have in Retford, and whether they are single or double, and we will arrange a free survey.
Automatic swing doors in Retford: questions
Will the swing operator in Retford work with our fire alarm?
It can. Fire doors that are held open must close automatically when the fire alarm operates, and the operator can be linked to the alarm to do this. Other doors can be set to open on alarm where the fire strategy needs it. Your alarm engineer usually makes the panel connection.
What will automatic swing doors in Retford cost?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Retford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit low-energy operators in Retford as well?
Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.
Can you service swing doors in Retford after fitting?
Yes. We can arrange planned servicing, with each visit priced in writing before an engineer attends. A trained engineer should check the safety functions at least once a year, and busy corridors, schools and hospitals usually need more frequent visits. Staff should also carry out simple daily checks.
How do you make sure the door works for disabled visitors in Retford?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
What happens once the installation in Retford is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in Retford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.