UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic swing doors · Kent

Automatic swing doors in Margate

Corridor doors, office entrances and school halls in Margate often need to open hands-free for staff, visitors and pupils on the move. We fit full-energy swing operators to new and existing doors, starting with a free survey and a fixed, itemised quote.

Town
Margate
Area
Kent
Postcodes
CT8, CT9
Guide price
From £2,495 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Margate and nearby

Requests for automatic swing doors in Margate are handled by us and passed to a specialist engineer working under our management. Coverage includes the CT8 and CT9 postcode districts: town-centre premises, business and retail sites, public buildings and residential streets alike.

Business parks around Margate tend to have reception doors that see steady rather than heavy traffic, often with access control after hours. A swing or sliding operator linked to a card reader or intercom is a common arrangement for entrances like these.

Nearby towns we also list for automatic swing doors (straight-line distance): Broadstairs (2.9 miles), Ramsgate (3.4 miles), Deal (11.0 miles), Herne Bay (11.1 miles), Canterbury (15.0 miles), Whitstable (15.6 miles).

What to think about for automatic swing doors in Margate

  • Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
  • Fire doors need care. The operator must suit the door, keep its fire performance intact and close the door when the alarm sounds, so have the door's labels and records to hand for the survey.
  • Hospital and care home corridors in Margate need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
  • Double doors with rebated meeting edges need operators that open and close in sequence. The engineer sets this up so the leaves never clash or leave a gap when closed.
  • Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.

Automatic swing doors in Margate: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.

ItemGuide priceNotes
Full-energy operator on an existing single door, with safety sensors£2,495 – £3,995installed, ex VAT
Operators on an existing pair of doors£3,795 – £6,495installed, ex VAT
New single automatic swing door set (door, frame and operator)£3,495 – £6,495installed, ex VAT
New double automatic swing door set£7,995 – £9,995installed, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in England

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Margate.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Use the guide price tool for a quick figure, then let us survey the doors in Margate and fix the price in writing.

Automatic swing doors in Margate: questions

Can our existing doors in Margate be automated?

Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.

How are prices worked out for automatic swing doors in Margate?

Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Margate confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

How quickly can a swing operator be fitted in Margate?

Operators for existing doors are typically 2 to 4 weeks from order. On site, a single door usually takes half a day to a day, and a pair about a day. We can plan work for evenings, weekends or holidays where the building is busy, with any extra cost shown in the quote.

Can you fit automatic swing door operators in Margate?

Yes. We arrange supply and installation of swing operators for doors in Margate and throughout Kent. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.

Do you service doors in Margate after installing them?

Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.

Can automatic doors be fitted to a listed building in Margate?

Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.

Do businesses in Margate have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automatic swing doors in Margate

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.