Covering Ashton-in-Makerfield and nearby
Engineers working under our management travel to addresses across the WN4 postcode district for automatic swing doors. There is no depot or showroom in Ashton-in-Makerfield; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Small offices, community centres and village halls around Ashton-in-Makerfield tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for automatic swing doors (straight-line distance): Haydock (1.7 miles), Golborne (2.2 miles), Newton-le-Willows (3.1 miles), St Helens (4.1 miles), Wigan (4.2 miles), Hindley (4.4 miles).
What to think about for automatic swing doors in Ashton-in-Makerfield
- Fire doors need care. The operator must suit the door, keep its fire performance intact and close the door when the alarm sounds, so have the door's labels and records to hand for the survey.
- Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
- Check the hinges first. Older doors in Ashton-in-Makerfield often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
- Doors on escape routes in Ashton-in-Makerfield usually open in the direction of escape. If the current door opens the other way, the survey will flag whether it should be changed before the operator is fitted.
Automatic swing doors in Ashton-in-Makerfield: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic swing doors and book a survey in Ashton-in-Makerfield.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Use the guide price tool for a quick figure, then let us survey the doors in Ashton-in-Makerfield and fix the price in writing.
Automatic swing doors in Ashton-in-Makerfield: questions
Can our existing doors in Ashton-in-Makerfield be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
What is the guide price for automatic swing doors in Ashton-in-Makerfield?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Ashton-in-Makerfield confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you service swing doors in Ashton-in-Makerfield after fitting?
Yes. We can arrange planned servicing, with each visit priced in writing before an engineer attends. A trained engineer should check the safety functions at least once a year, and busy corridors, schools and hospitals usually need more frequent visits. Staff should also carry out simple daily checks.
Is the survey for swing doors in Ashton-in-Makerfield free?
Yes, for new operators and doorsets the survey is free and carries no obligation. The engineer looks at each door, its hinges, frame, locks, power and fire labels, and you receive a fixed, itemised written quote for the work. Each door is priced separately, so the work can be phased if needed.
What do you need from us for parking and access in Ashton-in-Makerfield?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
What does the free site survey in Ashton-in-Makerfield involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic swing doors, with drawings where the door type needs them.
Which building regulations apply to a new automatic entrance in Ashton-in-Makerfield?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.